[PATCH AUTOSEL 5.7 167/388] usb: dwc3: gadget: Properly handle ClearFeature(halt)

From: Sasha Levin
Date: Wed Jun 17 2020 - 22:43:17 EST


From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>

[ Upstream commit cb11ea56f37a36288cdd0a4799a983ee3aa437dd ]

DWC3 must not issue CLEAR_STALL command to control endpoints. The
controller automatically clears the STALL when it receives the SETUP
token. Also, when the driver receives ClearFeature(halt_ep), DWC3 must
stop any active transfer from the endpoint and give back all the
requests to the function drivers.

Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver")
Signed-off-by: Thinh Nguyen <thinhn@xxxxxxxxxxxx>
Signed-off-by: Felipe Balbi <balbi@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/usb/dwc3/gadget.c | 36 +++++++++++++++++++++++++++++++++---
1 file changed, 33 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 585cb3deea7a..ab6562c5b927 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1508,6 +1508,10 @@ static void dwc3_gadget_ep_skip_trbs(struct dwc3_ep *dep, struct dwc3_request *r
{
int i;

+ /* If req->trb is not set, then the request has not started */
+ if (!req->trb)
+ return;
+
/*
* If request was already started, this means we had to
* stop the transfer. With that we also need to ignore
@@ -1598,6 +1602,8 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol)
{
struct dwc3_gadget_ep_cmd_params params;
struct dwc3 *dwc = dep->dwc;
+ struct dwc3_request *req;
+ struct dwc3_request *tmp;
int ret;

if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
@@ -1634,13 +1640,37 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol)
else
dep->flags |= DWC3_EP_STALL;
} else {
+ /*
+ * Don't issue CLEAR_STALL command to control endpoints. The
+ * controller automatically clears the STALL when it receives
+ * the SETUP token.
+ */
+ if (dep->number <= 1) {
+ dep->flags &= ~(DWC3_EP_STALL | DWC3_EP_WEDGE);
+ return 0;
+ }

ret = dwc3_send_clear_stall_ep_cmd(dep);
- if (ret)
+ if (ret) {
dev_err(dwc->dev, "failed to clear STALL on %s\n",
dep->name);
- else
- dep->flags &= ~(DWC3_EP_STALL | DWC3_EP_WEDGE);
+ return ret;
+ }
+
+ dep->flags &= ~(DWC3_EP_STALL | DWC3_EP_WEDGE);
+
+ dwc3_stop_active_transfer(dep, true, true);
+
+ list_for_each_entry_safe(req, tmp, &dep->started_list, list)
+ dwc3_gadget_move_cancelled_request(req);
+
+ list_for_each_entry_safe(req, tmp, &dep->pending_list, list)
+ dwc3_gadget_move_cancelled_request(req);
+
+ if (!(dep->flags & DWC3_EP_END_TRANSFER_PENDING)) {
+ dep->flags &= ~DWC3_EP_DELAY_START;
+ dwc3_gadget_ep_cleanup_cancelled_requests(dep);
+ }
}

return ret;
--
2.25.1