Re: [PATCH v3] arm64: dts: ti: k3-am654-main: Update otap-del-sel values

From: Tero Kristo
Date: Mon Jun 22 2020 - 03:41:49 EST


On 19/05/2020 11:20, Faiz Abbas wrote:
According to the latest AM65x Data Manual[1], a different output tap
delay value is optimum for a given speed mode. Update these values.

[1] http://www.ti.com/lit/gpn/am6526

Signed-off-by: Faiz Abbas <faiz_abbas@xxxxxx>
Queued up for 5.9, thanks.

-Tero

---

v3: Updated values to the latest data manual revision

v2: Updated to the latest mainline kernel

arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 11887c72f23a..056130a126f9 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -244,7 +244,17 @@
interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
- ti,otap-del-sel = <0x2>;
+ ti,otap-del-sel-legacy = <0x0>;
+ ti,otap-del-sel-mmc-hs = <0x0>;
+ ti,otap-del-sel-sd-hs = <0x0>;
+ ti,otap-del-sel-sdr12 = <0x0>;
+ ti,otap-del-sel-sdr25 = <0x0>;
+ ti,otap-del-sel-sdr50 = <0x8>;
+ ti,otap-del-sel-sdr104 = <0x7>;
+ ti,otap-del-sel-ddr50 = <0x5>;
+ ti,otap-del-sel-ddr52 = <0x5>;
+ ti,otap-del-sel-hs200 = <0x5>;
+ ti,otap-del-sel-hs400 = <0x0>;
ti,trm-icp = <0x8>;
dma-coherent;
};


--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki