[PATCH v2 2/3] amd8111e: Convert to generic power management

From: Vaibhav Gupta
Date: Mon Jun 22 2020 - 07:16:18 EST


Drivers should not save device registers and/or change the power state of
the device. As per the generic PM approach, these are handled by PCI core.

The driver should support dev_pm_ops callbacks and bind them to pci_driver.

Compile-tested only.

Signed-off-by: Vaibhav Gupta <vaibhavgupta40@xxxxxxxxx>
---
drivers/net/ethernet/amd/amd8111e.c | 30 +++++++++++------------------
1 file changed, 11 insertions(+), 19 deletions(-)

diff --git a/drivers/net/ethernet/amd/amd8111e.c b/drivers/net/ethernet/amd/amd8111e.c
index 7a1286f8e983..c6591b33abcc 100644
--- a/drivers/net/ethernet/amd/amd8111e.c
+++ b/drivers/net/ethernet/amd/amd8111e.c
@@ -1580,9 +1580,10 @@ static void amd8111e_tx_timeout(struct net_device *dev, unsigned int txqueue)
if(!err)
netif_wake_queue(dev);
}
-static int amd8111e_suspend(struct pci_dev *pci_dev, pm_message_t state)
+
+static int amd8111e_suspend(struct device *dev_d)
{
- struct net_device *dev = pci_get_drvdata(pci_dev);
+ struct net_device *dev = dev_get_drvdata(dev_d);
struct amd8111e_priv *lp = netdev_priv(dev);

if (!netif_running(dev))
@@ -1609,34 +1610,24 @@ static int amd8111e_suspend(struct pci_dev *pci_dev, pm_message_t state)
if(lp->options & OPTION_WAKE_PHY_ENABLE)
amd8111e_enable_link_change(lp);

- pci_enable_wake(pci_dev, PCI_D3hot, 1);
- pci_enable_wake(pci_dev, PCI_D3cold, 1);
+ device_set_wakeup_enable(dev_d, 1);

}
else{
- pci_enable_wake(pci_dev, PCI_D3hot, 0);
- pci_enable_wake(pci_dev, PCI_D3cold, 0);
+ device_set_wakeup_enable(dev_d, 0);
}

- pci_save_state(pci_dev);
- pci_set_power_state(pci_dev, PCI_D3hot);
-
return 0;
}
-static int amd8111e_resume(struct pci_dev *pci_dev)
+
+static int amd8111e_resume(struct device *dev_d)
{
- struct net_device *dev = pci_get_drvdata(pci_dev);
+ struct net_device *dev = dev_get_drvdata(dev_d);
struct amd8111e_priv *lp = netdev_priv(dev);

if (!netif_running(dev))
return 0;

- pci_set_power_state(pci_dev, PCI_D0);
- pci_restore_state(pci_dev);
-
- pci_enable_wake(pci_dev, PCI_D3hot, 0);
- pci_enable_wake(pci_dev, PCI_D3cold, 0); /* D3 cold */
-
netif_device_attach(dev);

spin_lock_irq(&lp->lock);
@@ -1918,13 +1909,14 @@ static const struct pci_device_id amd8111e_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, amd8111e_pci_tbl);

+static SIMPLE_DEV_PM_OPS(amd8111e_pm_ops, amd8111e_suspend, amd8111e_resume);
+
static struct pci_driver amd8111e_driver = {
.name = MODULE_NAME,
.id_table = amd8111e_pci_tbl,
.probe = amd8111e_probe_one,
.remove = amd8111e_remove_one,
- .suspend = amd8111e_suspend,
- .resume = amd8111e_resume
+ .driver.pm = &amd8111e_pm_ops
};

module_pci_driver(amd8111e_driver);
--
2.27.0