[PATCH v1 1/5] tulip: dmfe: use generic power management

From: Vaibhav Gupta
Date: Mon Jun 22 2020 - 07:44:16 EST


With legacy PM hooks, it was the responsibility of a driver to manage PCI
states and also the device's power state. The generic approach is to let the
PCI core handle the work.

The legacy suspend() and resume() were making use of
pci_read/write_config_dword() to enable/disable wol. Driver editing
configuration registers of a device is not recommended. Thus replace them
all with device_wakeup_enable/disable().

Compile-tested only.

Signed-off-by: Vaibhav Gupta <vaibhavgupta40@xxxxxxxxx>
---
drivers/net/ethernet/dec/tulip/dmfe.c | 49 +++++----------------------
1 file changed, 9 insertions(+), 40 deletions(-)

diff --git a/drivers/net/ethernet/dec/tulip/dmfe.c b/drivers/net/ethernet/dec/tulip/dmfe.c
index c1884fc9ad32..c3b4abff48b5 100644
--- a/drivers/net/ethernet/dec/tulip/dmfe.c
+++ b/drivers/net/ethernet/dec/tulip/dmfe.c
@@ -2081,14 +2081,11 @@ static const struct pci_device_id dmfe_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, dmfe_pci_tbl);

-
-#ifdef CONFIG_PM
-static int dmfe_suspend(struct pci_dev *pci_dev, pm_message_t state)
+static int __maybe_unused dmfe_suspend(struct device *dev_d)
{
- struct net_device *dev = pci_get_drvdata(pci_dev);
+ struct net_device *dev = dev_get_drvdata(dev_d);
struct dmfe_board_info *db = netdev_priv(dev);
void __iomem *ioaddr = db->ioaddr;
- u32 tmp;

/* Disable upper layer interface */
netif_device_detach(dev);
@@ -2105,63 +2102,35 @@ static int dmfe_suspend(struct pci_dev *pci_dev, pm_message_t state)
dmfe_free_rxbuffer(db);

/* Enable WOL */
- pci_read_config_dword(pci_dev, 0x40, &tmp);
- tmp &= ~(DMFE_WOL_LINKCHANGE|DMFE_WOL_MAGICPACKET);
-
- if (db->wol_mode & WAKE_PHY)
- tmp |= DMFE_WOL_LINKCHANGE;
- if (db->wol_mode & WAKE_MAGIC)
- tmp |= DMFE_WOL_MAGICPACKET;
-
- pci_write_config_dword(pci_dev, 0x40, tmp);
-
- pci_enable_wake(pci_dev, PCI_D3hot, 1);
- pci_enable_wake(pci_dev, PCI_D3cold, 1);
-
- /* Power down device*/
- pci_save_state(pci_dev);
- pci_set_power_state(pci_dev, pci_choose_state (pci_dev, state));
+ device_wakeup_enable(dev_d);

return 0;
}

-static int dmfe_resume(struct pci_dev *pci_dev)
+static int __maybe_unused dmfe_resume(struct device *dev_d)
{
- struct net_device *dev = pci_get_drvdata(pci_dev);
- u32 tmp;
-
- pci_set_power_state(pci_dev, PCI_D0);
- pci_restore_state(pci_dev);
+ struct net_device *dev = dev_get_drvdata(dev_d);

/* Re-initialize DM910X board */
dmfe_init_dm910x(dev);

/* Disable WOL */
- pci_read_config_dword(pci_dev, 0x40, &tmp);
-
- tmp &= ~(DMFE_WOL_LINKCHANGE | DMFE_WOL_MAGICPACKET);
- pci_write_config_dword(pci_dev, 0x40, tmp);
-
- pci_enable_wake(pci_dev, PCI_D3hot, 0);
- pci_enable_wake(pci_dev, PCI_D3cold, 0);
+ device_wakeup_disable(dev_d);

/* Restart upper layer interface */
netif_device_attach(dev);

return 0;
}
-#else
-#define dmfe_suspend NULL
-#define dmfe_resume NULL
-#endif
+
+static SIMPLE_DEV_PM_OPS(dmfe_pm_ops, dmfe_suspend, dmfe_resume);

static struct pci_driver dmfe_driver = {
.name = "dmfe",
.id_table = dmfe_pci_tbl,
.probe = dmfe_init_one,
.remove = dmfe_remove_one,
- .suspend = dmfe_suspend,
- .resume = dmfe_resume
+ .driver.pm = &dmfe_pm_ops,
};

MODULE_AUTHOR("Sten Wang, sten_wang@xxxxxxxxxxxxxx");
--
2.27.0