Re: [PATCH v9 2/2] PCI: xilinx-cpm: Add Versal CPM Root Port driver

[Lorenzo Pieralisi]

On Fri, Jul 10, 2020 at 09:16:57AM -0600, Rob Herring wrote:
> On Tue, Jun 16, 2020 at 6:57 AM Bharat Kumar Gogada
> <bharat.kumar.gogada@xxxxxxxxxx> wrote:
> >
> > - Add support for Versal CPM as Root Port.
> > - The Versal ACAP devices include CCIX-PCIe Module (CPM). The integrated
> >   block for CPM along with the integrated bridge can function
> >   as PCIe Root Port.
> > - Bridge error and legacy interrupts in Versal CPM are handled using
> >   Versal CPM specific interrupt line.
> >
> > Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xxxxxxxxxx>
> > ---
> >  drivers/pci/controller/Kconfig           |   8 +
> >  drivers/pci/controller/Makefile          |   1 +
> >  drivers/pci/controller/pcie-xilinx-cpm.c | 617 +++++++++++++++++++++++++++++++
> >  3 files changed, 626 insertions(+)
> >  create mode 100644 drivers/pci/controller/pcie-xilinx-cpm.c
> 
> [...]
> 
> > +static int xilinx_cpm_pcie_probe(struct platform_device *pdev)
> > +{
> > +       struct xilinx_cpm_pcie_port *port;
> > +       struct device *dev = &pdev->dev;
> > +       struct pci_host_bridge *bridge;
> > +       struct resource *bus_range;
> > +       int err;
> > +
> > +       bridge = devm_pci_alloc_host_bridge(dev, sizeof(*port));
> > +       if (!bridge)
> > +               return -ENODEV;
> > +
> > +       port = pci_host_bridge_priv(bridge);
> > +
> > +       port->dev = dev;
> > +
> > +       err = pci_parse_request_of_pci_ranges(dev, &bridge->windows,
> > +                                             &bridge->dma_ranges, &bus_range);
> > +       if (err) {
> > +               dev_err(dev, "Getting bridge resources failed\n");
> > +               return err;
> > +       }
> > +
> > +       err = xilinx_cpm_pcie_init_irq_domain(port);
> > +       if (err)
> > +               return err;
> > +
> > +       err = xilinx_cpm_pcie_parse_dt(port, bus_range);
> > +       if (err) {
> > +               dev_err(dev, "Parsing DT failed\n");
> > +               goto err_parse_dt;
> > +       }
> > +
> > +       xilinx_cpm_pcie_init_port(port);
> > +
> > +       err = xilinx_cpm_setup_irq(port);
> > +       if (err) {
> > +               dev_err(dev, "Failed to set up interrupts\n");
> > +               goto err_setup_irq;
> > +       }
> 
> All the h/w init here can be moved to an .init() function in ecam ops
> and then use pci_host_common_probe. Given this is v9, that can be a
> follow-up I guess.

I think there is time to get it done, Bharat please let me know if
you can repost it shortly with Rob's requested change implemented.

Thanks,
Lorenzo

> Otherwise,
> 
> Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> 
> > +
> > +       bridge->dev.parent = dev;
> > +       bridge->sysdata = port->cfg;
> > +       bridge->busnr = port->cfg->busr.start;
> > +       bridge->ops = &pci_generic_ecam_ops.pci_ops;
> > +       bridge->map_irq = of_irq_parse_and_map_pci;
> > +       bridge->swizzle_irq = pci_common_swizzle;
> > +
> > +       err = pci_host_probe(bridge);
> > +       if (err < 0)
> > +               goto err_host_bridge;
> > +
> > +       return 0;
> > +
> > +err_host_bridge:
> > +       xilinx_cpm_free_interrupts(port);
> > +err_setup_irq:
> > +       pci_ecam_free(port->cfg);
> > +err_parse_dt:
> > +       xilinx_cpm_free_irq_domains(port);
> > +       return err;
> > +}