Re: [PATCH v7 3/4] remoteproc: Add inline coredump functionality
From: Mathieu Poirier
Date: Wed Jul 15 2020 - 17:56:10 EST
On Wed, 15 Jul 2020 at 13:22, <rishabhb@xxxxxxxxxxxxxx> wrote:
>
> On 2020-07-14 10:53, Mathieu Poirier wrote:
> > On Thu, Jul 09, 2020 at 01:31:55PM -0700, Rishabh Bhatnagar wrote:
> >> The current coredump implementation uses vmalloc area to copy
> >> all the segments. But this might put strain on low memory targets
> >> as the firmware size sometimes is in tens of MBs. The situation
> >> becomes worse if there are multiple remote processors undergoing
> >> recovery at the same time. This patch adds inline coredump
> >> functionality that avoids extra memory usage. This requires
> >> recovery to be halted until data is read by userspace and free
> >> function is called. Also modify the qcom_q6v5_mss driver to include
> >> size and offset in the segment dump function.
> >>
> >> Signed-off-by: Rishabh Bhatnagar <rishabhb@xxxxxxxxxxxxxx>
> >> Reviewed-by: Sibi Sankar <sibis@xxxxxxxxxxxxxx>
> >> ---
> >> drivers/remoteproc/qcom_q6v5_mss.c | 11 ++-
> >> drivers/remoteproc/remoteproc_coredump.c | 160
> >> +++++++++++++++++++++++++++----
> >> include/linux/remoteproc.h | 21 +++-
> >> 3 files changed, 166 insertions(+), 26 deletions(-)
> >>
> >> diff --git a/drivers/remoteproc/qcom_q6v5_mss.c
> >> b/drivers/remoteproc/qcom_q6v5_mss.c
> >> index c6ce032..79df354 100644
> >> --- a/drivers/remoteproc/qcom_q6v5_mss.c
> >> +++ b/drivers/remoteproc/qcom_q6v5_mss.c
> >> @@ -1199,11 +1199,12 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
> >>
> >> static void qcom_q6v5_dump_segment(struct rproc *rproc,
> >> struct rproc_dump_segment *segment,
> >> - void *dest)
> >> + void *dest, size_t cp_offset, size_t size)
> >
> > Now that I'm taking another look at this, refactoring
> > qcom_q6v5_dump_segment()
> > should be in another patch - please split them.
> >
> Hi Mathieu,
> Thanks for reviewing.
>
> Since I'm changing the API signature if we just take this patch without
> q6v5_mss
> changes (in a separate patch) it would cause compilation errors. Is that
> ok?
Just fix the arguments in q6v5_mss to match the signature and then do
another patch to implement the inline coredump feature.
> >> {
> >> int ret = 0;
> >> struct q6v5 *qproc = rproc->priv;
> >> int offset = segment->da - qproc->mpss_reloc;
> >> + size_t cp_size = size ? size : segment->size;
> >
> > I can't find a scenario where size is 0 - can you explain when
> > such condition occurs?
> >
> There is no such case right now. I can get rid of the check.
> > Thanks,
> > Mathieu
> >
> >
> >> void *ptr = NULL;
> >>
> >> /* Unlock mba before copying segments */
> >> @@ -1219,16 +1220,16 @@ static void qcom_q6v5_dump_segment(struct
> >> rproc *rproc,
> >> }
> >>
> >> if (!ret)
> >> - ptr = ioremap_wc(qproc->mpss_phys + offset, segment->size);
> >> + ptr = ioremap_wc(qproc->mpss_phys + offset + cp_offset, cp_size);
> >>
> >> if (ptr) {
> >> - memcpy(dest, ptr, segment->size);
> >> + memcpy(dest, ptr, cp_size);
> >> iounmap(ptr);
> >> } else {
> >> - memset(dest, 0xff, segment->size);
> >> + memset(dest, 0xff, cp_size);
> >> }
> >>
> >> - qproc->current_dump_size += segment->size;
> >> + qproc->current_dump_size += cp_size;
> >>
> >> /* Reclaim mba after copying segments */
> >> if (qproc->current_dump_size == qproc->total_dump_size) {
> >> diff --git a/drivers/remoteproc/remoteproc_coredump.c
> >> b/drivers/remoteproc/remoteproc_coredump.c
> >> index ded0244..646886f 100644
> >> --- a/drivers/remoteproc/remoteproc_coredump.c
> >> +++ b/drivers/remoteproc/remoteproc_coredump.c
> >> @@ -5,6 +5,7 @@
> >> * Copyright (c) 2020, The Linux Foundation. All rights reserved.
> >> */
> >>
> >> +#include <linux/completion.h>
> >> #include <linux/devcoredump.h>
> >> #include <linux/device.h>
> >> #include <linux/kernel.h>
> >> @@ -12,6 +13,12 @@
> >> #include "remoteproc_internal.h"
> >> #include "remoteproc_elf_helpers.h"
> >>
> >> +struct rproc_coredump_state {
> >> + struct rproc *rproc;
> >> + void *header;
> >> + struct completion dump_done;
> >> +};
> >> +
> >> /**
> >> * rproc_coredump_cleanup() - clean up dump_segments list
> >> * @rproc: the remote processor handle
> >> @@ -72,7 +79,8 @@ int rproc_coredump_add_custom_segment(struct rproc
> >> *rproc,
> >> dma_addr_t da, size_t size,
> >> void (*dumpfn)(struct rproc *rproc,
> >> struct rproc_dump_segment *segment,
> >> - void *dest),
> >> + void *dest, size_t offset,
> >> + size_t size),
> >> void *priv)
> >> {
> >> struct rproc_dump_segment *segment;
> >> @@ -114,12 +122,110 @@ int rproc_coredump_set_elf_info(struct rproc
> >> *rproc, u8 class, u16 machine)
> >> }
> >> EXPORT_SYMBOL(rproc_coredump_set_elf_info);
> >>
> >> +static void rproc_coredump_free(void *data)
> >> +{
> >> + struct rproc_coredump_state *dump_state = data;
> >> +
> >> + complete(&dump_state->dump_done);
> >> + vfree(dump_state->header);
> >> +}
> >> +
> >> +static void *rproc_coredump_find_segment(loff_t user_offset,
> >> + struct list_head *segments,
> >> + size_t *data_left)
> >> +{
> >> + struct rproc_dump_segment *segment;
> >> +
> >> + list_for_each_entry(segment, segments, node) {
> >> + if (user_offset < segment->size) {
> >> + *data_left = segment->size - user_offset;
> >> + return segment;
> >> + }
> >> + user_offset -= segment->size;
> >> + }
> >> +
> >> + *data_left = 0;
> >> + return NULL;
> >> +}
> >> +
> >> +static void rproc_copy_segment(struct rproc *rproc, void *dest,
> >> + struct rproc_dump_segment *segment,
> >> + size_t offset, size_t size)
> >> +{
> >> + void *ptr;
> >> +
> >> + if (segment->dump) {
> >> + segment->dump(rproc, segment, dest, offset, size);
> >> + } else {
> >> + ptr = rproc_da_to_va(rproc, segment->da + offset, size);
> >> + if (!ptr) {
> >> + dev_err(&rproc->dev,
> >> + "invalid copy request for segment %pad with offset %zu and size
> >> %zu)\n",
> >> + &segment->da, offset, size);
> >> + memset(dest, 0xff, size);
> >> + } else {
> >> + memcpy(dest, ptr, size);
> >> + }
> >> + }
> >> +}
> >> +
> >> +static ssize_t rproc_coredump_read(char *buffer, loff_t offset,
> >> size_t count,
> >> + void *data, size_t header_sz)
> >> +{
> >> + size_t seg_data, bytes_left = count;
> >> + ssize_t copy_sz;
> >> + struct rproc_dump_segment *seg;
> >> + struct rproc_coredump_state *dump_state = data;
> >> + struct rproc *rproc = dump_state->rproc;
> >> + void *elfcore = dump_state->header;
> >> +
> >> + /* Copy the vmalloc'ed header first. */
> >> + if (offset < header_sz) {
> >> + copy_sz = memory_read_from_buffer(buffer, count, &offset,
> >> + elfcore, header_sz);
> >> +
> >> + return copy_sz;
> >> + }
> >> +
> >> + /*
> >> + * Find out the segment memory chunk to be copied based on offset.
> >> + * Keep copying data until count bytes are read.
> >> + */
> >> + while (bytes_left) {
> >> + seg = rproc_coredump_find_segment(offset - header_sz,
> >> + &rproc->dump_segments,
> >> + &seg_data);
> >> + /* EOF check */
> >> + if (!seg) {
> >> + dev_info(&rproc->dev, "Ramdump done, %lld bytes read",
> >> + offset);
> >> + break;
> >> + }
> >> +
> >> + copy_sz = min_t(size_t, bytes_left, seg_data);
> >> +
> >> + rproc_copy_segment(rproc, buffer, seg, seg->size - seg_data,
> >> + copy_sz);
> >> +
> >> + offset += copy_sz;
> >> + buffer += copy_sz;
> >> + bytes_left -= copy_sz;
> >> + }
> >> +
> >> + return count - bytes_left;
> >> +}
> >> +
> >> /**
> >> * rproc_coredump() - perform coredump
> >> * @rproc: rproc handle
> >> *
> >> * This function will generate an ELF header for the registered
> >> segments
> >> - * and create a devcoredump device associated with rproc.
> >> + * and create a devcoredump device associated with rproc. Based on
> >> the
> >> + * coredump configuration this function will directly copy the
> >> segments
> >> + * from device memory to userspace or copy segments from device
> >> memory to
> >> + * a separate buffer, which can then be read by userspace.
> >> + * The first approach avoids using extra vmalloc memory. But it will
> >> stall
> >> + * recovery flow until dump is read by userspace.
> >> */
> >> void rproc_coredump(struct rproc *rproc)
> >> {
> >> @@ -129,11 +235,13 @@ void rproc_coredump(struct rproc *rproc)
> >> size_t data_size;
> >> size_t offset;
> >> void *data;
> >> - void *ptr;
> >> u8 class = rproc->elf_class;
> >> int phnum = 0;
> >> + struct rproc_coredump_state dump_state;
> >> + enum rproc_dump_mechanism dump_conf = rproc->dump_conf;
> >>
> >> - if (list_empty(&rproc->dump_segments))
> >> + if (list_empty(&rproc->dump_segments) ||
> >> + dump_conf == RPROC_COREDUMP_DISABLED)
> >> return;
> >>
> >> if (class == ELFCLASSNONE) {
> >> @@ -143,7 +251,14 @@ void rproc_coredump(struct rproc *rproc)
> >>
> >> data_size = elf_size_of_hdr(class);
> >> list_for_each_entry(segment, &rproc->dump_segments, node) {
> >> - data_size += elf_size_of_phdr(class) + segment->size;
> >> + /*
> >> + * For default configuration buffer includes headers & segments.
> >> + * For inline dump buffer just includes headers as segments are
> >> + * directly read from device memory.
> >> + */
> >> + data_size += elf_size_of_phdr(class);
> >> + if (dump_conf == RPROC_COREDUMP_DEFAULT)
> >> + data_size += segment->size;
> >>
> >> phnum++;
> >> }
> >> @@ -182,23 +297,30 @@ void rproc_coredump(struct rproc *rproc)
> >> elf_phdr_set_p_flags(class, phdr, PF_R | PF_W | PF_X);
> >> elf_phdr_set_p_align(class, phdr, 0);
> >>
> >> - if (segment->dump) {
> >> - segment->dump(rproc, segment, data + offset);
> >> - } else {
> >> - ptr = rproc_da_to_va(rproc, segment->da, segment->size);
> >> - if (!ptr) {
> >> - dev_err(&rproc->dev,
> >> - "invalid coredump segment (%pad, %zu)\n",
> >> - &segment->da, segment->size);
> >> - memset(data + offset, 0xff, segment->size);
> >> - } else {
> >> - memcpy(data + offset, ptr, segment->size);
> >> - }
> >> - }
> >> + if (dump_conf == RPROC_COREDUMP_DEFAULT)
> >> + rproc_copy_segment(rproc, data + offset, segment, 0,
> >> + segment->size);
> >>
> >> offset += elf_phdr_get_p_filesz(class, phdr);
> >> phdr += elf_size_of_phdr(class);
> >> }
> >>
> >> - dev_coredumpv(&rproc->dev, data, data_size, GFP_KERNEL);
> >> + if (dump_conf == RPROC_COREDUMP_DEFAULT) {
> >> + dev_coredumpv(&rproc->dev, data, data_size, GFP_KERNEL);
> >> + return;
> >> + }
> >> +
> >> + /* Initialize the dump state struct to be used by
> >> rproc_coredump_read */
> >> + dump_state.rproc = rproc;
> >> + dump_state.header = data;
> >> + init_completion(&dump_state.dump_done);
> >> +
> >> + dev_coredumpm(&rproc->dev, NULL, &dump_state, data_size, GFP_KERNEL,
> >> + rproc_coredump_read, rproc_coredump_free);
> >> +
> >> + /*
> >> + * Wait until the dump is read and free is called. Data is freed
> >> + * by devcoredump framework automatically after 5 minutes.
> >> + */
> >> + wait_for_completion(&dump_state.dump_done);
> >> }
> >> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
> >> index e7b7bab..38d037d 100644
> >> --- a/include/linux/remoteproc.h
> >> +++ b/include/linux/remoteproc.h
> >> @@ -435,6 +435,20 @@ enum rproc_crash_type {
> >> };
> >>
> >> /**
> >> + * enum rproc_dump_mechanism - Coredump options for core
> >> + * @RPROC_COREDUMP_DEFAULT: Copy dump to separate buffer and carry on
> >> with
> >> + recovery
> >> + * @RPROC_COREDUMP_INLINE: Read segments directly from device memory.
> >> Stall
> >> + recovery until all segments are read
> >> + * @RPROC_COREDUMP_DISABLED: Don't perform any dump
> >> + */
> >> +enum rproc_dump_mechanism {
> >> + RPROC_COREDUMP_DEFAULT,
> >> + RPROC_COREDUMP_INLINE,
> >> + RPROC_COREDUMP_DISABLED,
> >> +};
> >> +
> >> +/**
> >> * struct rproc_dump_segment - segment info from ELF header
> >> * @node: list node related to the rproc segment list
> >> * @da: device address of the segment
> >> @@ -451,7 +465,7 @@ struct rproc_dump_segment {
> >>
> >> void *priv;
> >> void (*dump)(struct rproc *rproc, struct rproc_dump_segment
> >> *segment,
> >> - void *dest);
> >> + void *dest, size_t offset, size_t size);
> >> loff_t offset;
> >> };
> >>
> >> @@ -466,6 +480,7 @@ struct rproc_dump_segment {
> >> * @dev: virtual device for refcounting and common remoteproc
> >> behavior
> >> * @power: refcount of users who need this rproc powered up
> >> * @state: state of the device
> >> + * @dump_conf: Currently selected coredump configuration
> >> * @lock: lock which protects concurrent manipulations of the rproc
> >> * @dbg_dir: debugfs directory of this rproc device
> >> * @traces: list of trace buffers
> >> @@ -499,6 +514,7 @@ struct rproc {
> >> struct device dev;
> >> atomic_t power;
> >> unsigned int state;
> >> + enum rproc_dump_mechanism dump_conf;
> >> struct mutex lock;
> >> struct dentry *dbg_dir;
> >> struct list_head traces;
> >> @@ -630,7 +646,8 @@ int rproc_coredump_add_custom_segment(struct rproc
> >> *rproc,
> >> dma_addr_t da, size_t size,
> >> void (*dumpfn)(struct rproc *rproc,
> >> struct rproc_dump_segment *segment,
> >> - void *dest),
> >> + void *dest, size_t offset,
> >> + size_t size),
> >> void *priv);
> >> int rproc_coredump_set_elf_info(struct rproc *rproc, u8 class, u16
> >> machine);
> >>
> >> --
> >> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
> >> Forum,
> >> a Linux Foundation Collaborative Project
> >>