Re: [PATCH 2/2] usb: typec: intel_pmc_mux: Check the port status before connect

[Greg Kroah-Hartman]

On Wed, Jul 15, 2020 at 05:33:10PM -0700, Rajmohan Mani wrote:
> From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
> 
> The PMC microcontroller that we use for configuration, does
> not supply any status information back. For port status we
> need to talk to another controller on the board called IOM
> (I/O manager).
> 
> By checking the port status before configuring the muxes, we
> can make sure that we do not reconfigure the port after
> bootup when the system firmware (for example BIOS) has
> already configured it.
> 
> Using the status information also to check if DisplayPort
> HPD is still asserted when the cable plug is disconnected,
> and clearing it if it is.
> 
> Signed-off-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>

You can't just forward on patches from others without also adding your
signed-off-by to them, right?

Please fix up this series and try again.

thanks,

greg k-h