[PATCH 0/3] Some sx9310 iio driver updates

[Stephen Boyd]

These patches are only related because I'm looking at this driver. The
first one resends the DT binding for the driver that was merged in
v5.8-rc1 with a small change to update for proper regulators. The second
patch fixes a few printks that are missing newlines and should be
totally non-trivial to apply. The third patch changes whoami to unsigned
to avoid confusing. The fourth patch drops channel_users because it's
unused. The final patch adds support to enable the svdd and vdd supplies
so that this driver can work on a board I have where the svdd supply
isn't enabled at boot and needs to be turned on before this driver
starts to communicate with the chip.

Changes from v1:
 * Two new patches for whoami and channel_uesrs
 * Use bulk regulator APIs for supplies patch
 * Support both regulators

Daniel Campello (1):
  dt-bindings: iio: Add bindings for sx9310 sensor

Stephen Boyd (4):
  iio: sx9310: Add newlines to printks
  iio: sx9310: whoami is unsigned
  iio: sx9310: Drop channel_users[]
  iio: sx9310: Enable vdd and svdd regulators at probe

 .../iio/proximity/semtech,sx9310.yaml         | 60 +++++++++++++++++++
 drivers/iio/proximity/sx9310.c                | 46 +++++++++++---
 2 files changed, 97 insertions(+), 9 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml

Cc: Hartmut Knaack <knaack.h@xxxxxx>
Cc: Lars-Peter Clausen <lars@xxxxxxxxxx>
Cc: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Douglas Anderson <dianders@xxxxxxxxxxxx>
Cc: Daniel Campello <campello@xxxxxxxxxxxx>

base-commit: b3a9e3b9622ae10064826dccb4f7a52bd88c7407
-- 
Sent by a computer, using git, on the internet