Re: [PATCH v7 0/2] phy: Add USB PHY support on Intel LGM SoC

[Andy Shevchenko]

On Mon, Jul 27, 2020 at 1:08 PM Ramuthevar,Vadivel MuruganX
<vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx> wrote:
>
> The USB PHY provides the optimized for low power dissipation while active, idle, or on standby.
> Requires minimal external components, a single resistor, for best operation.
> Supports 10/5-Gbps high-speed data transmission rates through 3-m USB 3.x cable
> ---

> v7:
>   - No Change

I guess it's not the correct changelog entry.
You moved file to another subsystem, didn't you?

> v6:
>   - No Change
> v5:
>   - As per Felipe and Greg's suggestion usb phy driver reviewed patches
>     changed the folder from drivers/usb/phy to drivers/phy
>   - Reviewed-By tag added in commit message
> v4:
>   - Andy's review comments addressed
>   - drop the excess error debug prints
>   - error check optimized
>   - merge the split line to one line
> v3:
>   - Andy's review comments update
>   - hardcode return value changed to actual return value from the callee
>   - add error check is fixed according to the above
>   - correct the assignment in redundant
>   - combine the split line into one line
> v2:
>   - Address Phillip's review comments
>   - replace devm_reset_control_get() by devm_reset_control_get_exclusive()
>   - re-design the assert and deassert fucntion calls as per review comments
>   - address kbuild bot warnings
>   - add the comments
> v1:
>   - initial version
>
> ---
> dt-bindings: usb: Add USB PHY support for Intel LGM SoC
> v7:
>   - Fixed the bot issue: usb-phy@e7e00000: '#phy-cells' is a required property
> v6:
>   - Fixed the bot issue.
>   - replace node-name by usb-phy@ in example
> v5:
>   - Reviewed-By tag added
> v4:
>   - No Change
> v3:
>   - No Change
> v2:
>   - No Change
> v1:
>   - initial version
>
>
> Ramuthevar Vadivel Murugan (2):
>   dt-bindings: phy: Add USB PHY support for Intel LGM SoC
>   phy: Add USB3 PHY support for Intel LGM SoC
>
>  .../devicetree/bindings/phy/intel,lgm-usb-phy.yaml |  58 +++++
>  drivers/phy/Kconfig                                |  11 +
>  drivers/phy/Makefile                               |   1 +
>  drivers/phy/phy-lgm-usb.c                          | 278 +++++++++++++++++++++
>  4 files changed, 348 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/intel,lgm-usb-phy.yaml
>  create mode 100644 drivers/phy/phy-lgm-usb.c
>
> --
> 2.11.0
>


-- 
With Best Regards,
Andy Shevchenko