Re: [PATCH v6 0/9] hwmon: pmbus: adm1266: add support

From: Guenter Roeck
Date: Mon Jul 27 2020 - 10:39:07 EST


On 7/26/20 10:31 PM, alexandru.tachici@xxxxxxxxxx wrote:
> From: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
>
> Add PMBus probing driver for the adm1266 Cascadable
> Super Sequencer with Margin Control and Fault Recording.
> Driver is using the pmbus_core, creating sysfs files
> under hwmon for inputs: vh1->vh4 and vp1->vp13.
>

What happened to change logs ? Do you really expect me
to go through the history of this series to figure out
what changed from and in previous revisions of this
patch set ?

Guenter

> 1. Add PMBus probing driver for inputs vh1->vh4
> and vp1->vp13.
>
> 2. Add Block Write-Read Process Call command.
> A PMBus specific implementation was required because
> block write with I2C_SMBUS_PROC_CALL flag allows a
> maximum of 32 bytes to be received.
>
> 3. This makes adm1266 driver expose GPIOs
> to user-space. Currently are read only. Future
> developments on the firmware will allow
> them to be writable.
>
> 4. Allow the current sate of the seqeuncer to be read
> through debugfs.
>
> 5. Blackboxes are 64 bytes of chip state related data
> that is generated on faults. Use the nvmem kernel api
> to expose the blackbox chip functionality to userspace.
>
> 6. Add group command support. This will allow the driver
> to stop/program all cascaded adm1266 devices at once.
>
> 7. Writing the firmware hex file with offset 0
> to the nvmem of the master adm1266 will trigger
> the firmware programming of all cascaded devices.
> The master adm1266 of each device is specified in
> the devicetree.
>
> 8. Writing the configuration hex file to 0x30000
> byte address of the nvmem file will trigger the
> programing of that device in particular.
>
> 9. dt bindings for ADM1266.
>
> Alexandru Tachici (9):
> hwmon: pmbus: adm1266: add support
> hwmon: pmbus: adm1266: Add Block process call
> hwmon: pmbus: adm1266: Add support for GPIOs
> hwmon: pmbus: adm1266: add debugfs for states
> hwmon: pmbus: adm1266: read blackbox
> hwmon: pmbus: adm1266: Add group command support
> hwmon: pmbus: adm1266: program firmware
> hwmon: pmbus: adm1266: program configuration
> dt-bindings: hwmon: Add bindings for ADM1266
>
> .../bindings/hwmon/adi,adm1266.yaml | 56 +
> Documentation/hwmon/adm1266.rst | 37 +
> Documentation/hwmon/index.rst | 1 +
> drivers/hwmon/pmbus/Kconfig | 10 +
> drivers/hwmon/pmbus/Makefile | 1 +
> drivers/hwmon/pmbus/adm1266.c | 1273 +++++++++++++++++
> 6 files changed, 1378 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml
> create mode 100644 Documentation/hwmon/adm1266.rst
> create mode 100644 drivers/hwmon/pmbus/adm1266.c
>