Re: [PATCH 0/4] arm64: Initial support for Texas Instrument's J7200 Platform

[Grygorii Strashko]

On 28/07/2020 22:19, Grygorii Strashko wrote:
> On 23/07/2020 11:46, Lokesh Vutla wrote:
> > This series adds initial support for latest new SoC, J7200, from Texas Instruments.
> >
> > The J7200 SoC is a part of the K3 Multicore SoC architecture platform.
> > It is targeted for for automotive gateway, vehicle compute systems,
> > Vehicle-to-Vehicle (V2V) and Vehicle-to-Everything (V2X) applications.
> > The SoC aims to meet the complex processing needs of modern embedded products.
> >
> > See J7200 Technical Reference Manual (SPRUIU1, June 2020)
> > for further details: https://www.ti.com/lit/pdf/spruiu1
> >
> > Testing:
> > - Boot log: https://pastebin.ubuntu.com/p/FvpzWjf7tw/
> > - ./scripts/checkpatch --strict
> > ÂÂÂÂ- Few warningns about Line length exceeding 100 columns.
> > ÂÂÂÂÂ But these are corresponding to comments
> > - v8make dtbs_check
> > - DT_SCHEMA_FLAGS="-u"
> > ÂÂ DT_SCHEMA_FILES="Documentation/devicetree/bindings/arm/ti/k3.yaml"
> > ÂÂ v8make dtbs_check
> > - DT_SCHEMA_FLAGS="-u"
> > ÂÂ DT_SCHEMA_FILES="Documentation/devicetree/bindings/arm/ti/k3.yaml"
> > ÂÂ v8make dt_binding_check
> >
> > Lokesh Vutla (4):
> > ÂÂ dt-bindings: arm: ti: Add bindings for J7200 SoC
> > ÂÂ dt-bindings: arm: ti: Convert K3 board/soc bindings to DT schema
> > ÂÂ arm64: dts: ti: Add support for J7200 SoC
> > ÂÂ arm64: dts: ti: Add support for J7200 Common Processor Board
> >
> > Â .../devicetree/bindings/arm/ti/k3.txtÂÂÂÂÂÂÂÂ |Â 26 ---
> > Â .../devicetree/bindings/arm/ti/k3.yamlÂÂÂÂÂÂÂ |Â 28 +++
> > Â MAINTAINERSÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂ 2 +-
> > Â arch/arm64/boot/dts/ti/MakefileÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂ 3 +-
> > Â .../dts/ti/k3-j7200-common-proc-board.dtsÂÂÂÂ |Â 64 ++++++
> > Â arch/arm64/boot/dts/ti/k3-j7200-main.dtsiÂÂÂÂ | 199 ++++++++++++++++++
> > Â .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsiÂÂÂÂÂ |Â 84 ++++++++
> > Â arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsiÂÂ |Â 29 +++
> > Â arch/arm64/boot/dts/ti/k3-j7200.dtsiÂÂÂÂÂÂÂÂÂ | 165 +++++++++++++++
> > Â 9 files changed, 572 insertions(+), 28 deletions(-)
> > Â delete mode 100644 Documentation/devicetree/bindings/arm/ti/k3.txt
> > Â create mode 100644 Documentation/devicetree/bindings/arm/ti/k3.yaml
> > Â create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
> > Â create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
> > Â create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
> > Â create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
> > Â create mode 100644 arch/arm64/boot/dts/ti/k3-j7200.dtsi
>
> I have networking enabled on top of this series here.
>
> ssh://git@xxxxxxxxxxxxxxxxxxxx/~x1045550/ti-priv-linux-kernel.git ti-linux-5.4.y-for-next-pull
>
> But DMA failed for Main domain.
>  ÂÂÂ 0.781005] ti-udma 31150000.dma-controller: NAVSS ti,sci-dev-id read failure -22
> [ÂÂÂ 0.788684] ti-udma: probe of 31150000.dma-controller failed with error -22
>
> http://lcpdresults.itg.ti.com/launcher/results/8013
>
> Is there anything (except my comment for patch 3) which prevents this from been merged?

Sry. Pls. ignore this mail.

--
Best regards,
grygorii