Re: [RESEND PATCH v1 1/2] thermal: qcom-spmi-temp-alarm: add support for GEN2 rev 1 PMIC peripherals

From: Guru Das Srinagesh
Date: Wed Jul 29 2020 - 12:16:56 EST


On Tue, Jul 28, 2020 at 06:08:28PM -0700, Stephen Boyd wrote:
> Quoting Guru Das Srinagesh (2020-07-24 10:46:10)
> > diff --git a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
> > index bf7bae4..05a9601 100644
> > --- a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
> > +++ b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
> > @@ -38,26 +39,30 @@
> >
> > #define ALARM_CTRL_FORCE_ENABLE BIT(7)
> >
> > -/*
> > - * Trip point values based on threshold control
> > - * 0 = {105 C, 125 C, 145 C}
> > - * 1 = {110 C, 130 C, 150 C}
> > - * 2 = {115 C, 135 C, 155 C}
> > - * 3 = {120 C, 140 C, 160 C}
> > -*/
> > -#define TEMP_STAGE_STEP 20000 /* Stage step: 20.000 C */
> > -#define TEMP_STAGE_HYSTERESIS 2000
> > +#define THRESH_COUNT 4
> > +#define STAGE_COUNT 3
> > +
> > +/* Over-temperature trip point values in mC */
> > +static const long temp_map_gen1[THRESH_COUNT][STAGE_COUNT] = {
> > + {105000, 125000, 145000},
>
> Please add a space after { and before }

Done.

>
> > + {110000, 130000, 150000},
> > + {115000, 135000, 155000},
> > + {120000, 140000, 160000},
> > +};
> > +
> > +static const long temp_map_gen2_v1[THRESH_COUNT][STAGE_COUNT] = {
> > + { 90000, 110000, 140000},
>
> Almost.

Done.

>
> > + { 95000, 115000, 145000},
> > + {100000, 120000, 150000},
> > + {105000, 125000, 155000},
> > +};
> >
> > -#define TEMP_THRESH_MIN 105000 /* Threshold Min: 105 C */
> > -#define TEMP_THRESH_STEP 5000 /* Threshold step: 5 C */
> > +#define TEMP_THRESH_STEP 5000 /* Threshold step: 5 C */
> >
> > #define THRESH_MIN 0
> > #define THRESH_MAX 3
> >
> > -/* Stage 2 Threshold Min: 125 C */
> > -#define STAGE2_THRESHOLD_MIN 125000
> > -/* Stage 2 Threshold Max: 140 C */
> > -#define STAGE2_THRESHOLD_MAX 140000
> > +#define TEMP_STAGE_HYSTERESIS 2000
> >
> > /* Temperature in Milli Celsius reported during stage 0 if no ADC is present */
> > #define DEFAULT_TEMP 37000
> > @@ -77,6 +82,7 @@ struct qpnp_tm_chip {
> > bool initialized;
> >
> > struct iio_channel *adc;
> > + const long (*temp_map)[THRESH_COUNT][STAGE_COUNT];
>
> It can be negative Celsius?

It's not unsigned because it has to match struct qpnp_tm_chip's temp
member, which is long - hope I understood your concern correctly. The
temperatures themselves cannot be negative.

>
> > };
> >
> > /* This array maps from GEN2 alarm state to GEN1 alarm stage */
> > @@ -101,6 +107,23 @@ static int qpnp_tm_write(struct qpnp_tm_chip *chip, u16 addr, u8 data)
> > }
> >
> > /**
> > + * qpnp_tm_decode_temp() - return temperature in mC corresponding to the
> > + * specified over-temperature stage
> > + * @chip: Pointer to the qpnp_tm chip
> > + * @stage: Over-temperature stage
> > + *
> > + * Return: temperature in mC
> > + */
> > +static long qpnp_tm_decode_temp(struct qpnp_tm_chip *chip, unsigned int stage)
> > +{
> > + if (!chip->temp_map || chip->thresh >= THRESH_COUNT || stage == 0
> > + || stage > STAGE_COUNT)
>
> Nitpick: The || goes on the line above.

Done.

>
> > + return 0;
> > +
> > + return (*chip->temp_map)[chip->thresh][stage - 1];
> > +}
> > +
> > +/**
> > * qpnp_tm_get_temp_stage() - return over-temperature stage
> > * @chip: Pointer to the qpnp_tm chip
> > *