Re: [PATCH net 0/4] support multipacket broadcast message
From: Oleksij Rempel
Date: Fri Aug 07 2020 - 09:16:12 EST
On Fri, Aug 07, 2020 at 05:36:38PM +0800, Zhang Changzhong wrote:
> Hi Oleksij,
> We have tested this j1939 stack according to SAE J1939-21. It works fine for
> most cases, but when we test multipacket broadcast message function we found
> the receiver can't receive those packets.
> You can reproduce on CAN bus or vcan, for vcan case use cangw to connect vcan0
> and vcan1:
> sudo cangw -A -s vcan0 -d vcan1 -e
> sudo cangw -A -s vcan1 -d vcan0 -e
> To reproduce it use following commands:
> testj1939 -B -r vcan1:0x90 &
> testj1939 -B -s20 vcan0:0x80 :,0x12300
> Besides, candump receives correct packets while testj1939 receives nothing.
Ok, thank you!
i'm able to reproduce it and added following test:
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Description: PGP signature