[PATCH 1/3] arm64: dts: qcom: sm8150: fix up primary USB nodes

[Jonathan Marek]

The compatible for hsphy has out of place indentation, and the assigned
clock rate for GCC_USB30_PRIM_MASTER_CLK is incorrect, the clock doesn't
support a rate of 150000000. Use a rate of 200000000 to match downstream.

Fixes: b33d2868e8d3 ("arm64: dts: qcom: sm8150: Add USB and PHY device nodes")

Signed-off-by: Jonathan Marek <jonathan@xxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm8150.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index b86a7ead3006..ab8680c6672e 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -767,7 +767,7 @@ glink-edge {
 
 		usb_1_hsphy: phy@88e2000 {
 			compatible = "qcom,sm8150-usb-hs-phy",
-							"qcom,usb-snps-hs-7nm-phy";
+				     "qcom,usb-snps-hs-7nm-phy";
 			reg = <0 0x088e2000 0 0x400>;
 			status = "disabled";
 			#phy-cells = <0>;
@@ -833,7 +833,7 @@ usb_1: usb@a6f8800 {
 
 			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
-			assigned-clock-rates = <19200000>, <150000000>;
+			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
-- 
2.26.1