[PATCH v2] drivers: staging: comedi: fixed duplicate words from checkpatch

[Ethan Edwards]

Fixed various different checkpatch duplicate word warnings, the TODO
file said to fix checkpatch warnings.

Signed-off-by: Ethan Edwards <ethancarteredwards@xxxxxxxxx>
---
Old email has lines about CC'ing the mailing lists, patch v2 fixes this.
 drivers/staging/comedi/comedi.h                  | 4 ++--
 drivers/staging/comedi/comedidev.h               | 2 +-
 drivers/staging/comedi/drivers/addi_apci_1564.c  | 4 ++--
 drivers/staging/comedi/drivers/comedi_8255.c     | 2 +-
 drivers/staging/comedi/drivers/ni_tiocmd.c       | 2 +-
 drivers/staging/comedi/drivers/pcmuio.c          | 2 +-
 drivers/staging/comedi/drivers/quatech_daqp_cs.c | 2 +-
 7 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/staging/comedi/comedi.h b/drivers/staging/comedi/comedi.h
index 09a940066c0e..b5d00a006dbb 100644
--- a/drivers/staging/comedi/comedi.h
+++ b/drivers/staging/comedi/comedi.h
@@ -680,7 +680,7 @@ struct comedi_rangeinfo {
  * value of 1 volt.
  *
  * The only defined flag value is %RF_EXTERNAL (%0x100), indicating that the
- * the range needs to be multiplied by an external reference.
+ * range needs to be multiplied by an external reference.
  */
 struct comedi_krange {
 	int min;
@@ -970,7 +970,7 @@ enum i8254_mode {
  *   major reasons exist why this caused major confusion for users:
  *   1) The register values are _NOT_ in user documentation, but rather in
  *     arcane locations, such as a few register programming manuals that are
- *     increasingly hard to find and the NI MHDDK (comments in in example code).
+ *     increasingly hard to find and the NI MHDDK (comments in example code).
  *     There is no one place to find the various valid values of the registers.
  *   2) The register values are _NOT_ completely consistent.  There is no way to
  *     gain any sense of intuition of which values, or even enums one should use
diff --git a/drivers/staging/comedi/comedidev.h b/drivers/staging/comedi/comedidev.h
index 0dff1ac057cd..0e1b95ef9a4d 100644
--- a/drivers/staging/comedi/comedidev.h
+++ b/drivers/staging/comedi/comedidev.h
@@ -627,7 +627,7 @@ extern const struct comedi_lrange range_unknown;
  * @range: Array of &struct comedi_krange, one for each range.
  *
  * Each element of @range[] describes the minimum and maximum physical range
- * range and the type of units.  Typically, the type of unit is %UNIT_volt
+ * and the type of units.  Typically, the type of unit is %UNIT_volt
  * (i.e. volts) and the minimum and maximum are in millionths of a volt.
  * There may also be a flag that indicates the minimum and maximum are merely
  * scale factors for an unknown, external reference.
diff --git a/drivers/staging/comedi/drivers/addi_apci_1564.c b/drivers/staging/comedi/drivers/addi_apci_1564.c
index fadefcb5c237..06fc7ed96200 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1564.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1564.c
@@ -544,7 +544,7 @@ static int apci1564_timer_insn_write(struct comedi_device *dev,
 {
 	struct apci1564_private *devpriv = dev->private;
 
-	/* just write the last last to the reload register */
+	/* just write the last to the reload register */
 	if (insn->n) {
 		unsigned int val = data[insn->n - 1];
 
@@ -628,7 +628,7 @@ static int apci1564_counter_insn_write(struct comedi_device *dev,
 	unsigned int chan = CR_CHAN(insn->chanspec);
 	unsigned long iobase = devpriv->counters + APCI1564_COUNTER(chan);
 
-	/* just write the last last to the reload register */
+	/* just write the last to the reload register */
 	if (insn->n) {
 		unsigned int val = data[insn->n - 1];
 
diff --git a/drivers/staging/comedi/drivers/comedi_8255.c b/drivers/staging/comedi/drivers/comedi_8255.c
index 3298725b9ba5..b7ca465933ee 100644
--- a/drivers/staging/comedi/drivers/comedi_8255.c
+++ b/drivers/staging/comedi/drivers/comedi_8255.c
@@ -248,7 +248,7 @@ EXPORT_SYMBOL_GPL(subdev_8255_mm_init);
  * subdev_8255_regbase - get offset of 8255 registers or call-back context
  * @s: comedi subdevice
  *
- * Returns the 'regbase' parameter that was previously passed to to
+ * Returns the 'regbase' parameter that was previously passed to
  * subdev_8255_init() or subdev_8255_mm_init() to set up the subdevice.
  * Only valid if the subdevice was set up successfully.
  */
diff --git a/drivers/staging/comedi/drivers/ni_tiocmd.c b/drivers/staging/comedi/drivers/ni_tiocmd.c
index 2a9f7e9821a7..ab6d9e8269f3 100644
--- a/drivers/staging/comedi/drivers/ni_tiocmd.c
+++ b/drivers/staging/comedi/drivers/ni_tiocmd.c
@@ -286,7 +286,7 @@ int ni_tio_cmdtest(struct comedi_device *dev,
 		 * This should be done, but we don't yet know the actual
 		 * register values.  These should be tested and then documented
 		 * in the ni_route_values/ni_*.csv files, with indication of
-		 * who/when/which/how these these were tested.
+		 * who/when/which/how these were tested.
 		 * When at least a e/m/660x series have been tested, this code
 		 * should be uncommented:
 		 *
diff --git a/drivers/staging/comedi/drivers/pcmuio.c b/drivers/staging/comedi/drivers/pcmuio.c
index 7e1fc6ffb48c..b299d648a0eb 100644
--- a/drivers/staging/comedi/drivers/pcmuio.c
+++ b/drivers/staging/comedi/drivers/pcmuio.c
@@ -48,7 +48,7 @@
  *
  * In the 48-channel version:
  *
- * On subdev 0, the first 24 channels channels are edge-detect channels.
+ * On subdev 0, the first 24 channels are edge-detect channels.
  *
  * In the 96-channel board you have the following channels that can do edge
  * detection:
diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
index 1b1efa4d31f6..fe4408ebf6b3 100644
--- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c
+++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
@@ -164,7 +164,7 @@ static int daqp_clear_events(struct comedi_device *dev, int loops)
 
 	/*
 	 * Reset any pending interrupts (my card has a tendency to require
-	 * require multiple reads on the status register to achieve this).
+	 * multiple reads on the status register to achieve this).
 	 */
 	while (--loops) {
 		status = inb(dev->iobase + DAQP_STATUS_REG);
-- 
2.28.0