Re: [PATCH 2/4] ARM: dts: r8a7742-iwg21d-q7: Add SPI NOR support

From: Geert Uytterhoeven
Date: Thu Sep 03 2020 - 08:02:23 EST


Hi Prabhakar,

On Tue, Aug 25, 2020 at 6:28 PM Lad Prabhakar
<prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> wrote:
> Add support for the SPI NOR device which is connected to MSIOF0 interface
> on the iWave RainboW-G21d-q7 board.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> Reviewed-by: Chris Paterson <Chris.Paterson2@xxxxxxxxxxx>

> --- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
> +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
> @@ -220,6 +220,32 @@
> status = "okay";
> };
>
> +&msiof0 {
> + pinctrl-0 = <&msiof0_pins>;
> + pinctrl-names = "default";
> + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
> +
> + status = "okay";
> +
> + flash1: flash@0 {
> + compatible = "sst,sst25vf016b", "jedec,spi-nor";
> + reg = <0>;
> + spi-max-frequency = <50000000>;
> + m25p,fast-read;
> +
> + partitions {
> + compatible = "fixed-partitions";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + partition@0 {
> + label = "user";
> + reg = <0x00000000 0x00200000>;
> + };
> + };
> + };
> +};
> +
> &pci0 {
> pinctrl-0 = <&usb0_pins>;
> pinctrl-names = "default";
> @@ -266,6 +292,11 @@
> function = "i2c2";
> };
>
> + msiof0_pins: msiof0 {
> + groups = "msiof0_clk", "msiof0_tx", "msiof0_rx";

I think you're missing "msiof0_sync", connected to SPI_CS0#?

With that fixed:
Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>

> + function = "msiof0";
> + };

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds