[PATCH 5.4 112/129] drm/amd/pm: avoid false alarm due to confusing softwareshutdowntemp setting

[Greg Kroah-Hartman]

From: Evan Quan <evan.quan@xxxxxxx>

commit 971df65cbf32da9bc9af52c1196ca504dd316086 upstream.

Normally softwareshutdowntemp should be greater than Thotspotlimit.
However, on some VEGA10 ASIC, the softwareshutdowntemp is 91C while
Thotspotlimit is 105C. This seems not right and may trigger some
false alarms.

Signed-off-by: Evan Quan <evan.quan@xxxxxxx>
Acked-by: Alex Deucher <alexander.deucher@xxxxxxx>
Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/gpu/drm/amd/powerplay/hwmgr/vega10_thermal.c |   14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_thermal.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_thermal.c
@@ -375,8 +375,18 @@ static int vega10_thermal_set_temperatur
 	/* compare them in unit celsius degree */
 	if (low < range->min / PP_TEMPERATURE_UNITS_PER_CENTIGRADES)
 		low = range->min / PP_TEMPERATURE_UNITS_PER_CENTIGRADES;
-	if (high > tdp_table->usSoftwareShutdownTemp)
-		high = tdp_table->usSoftwareShutdownTemp;
+
+	/*
+	 * As a common sense, usSoftwareShutdownTemp should be bigger
+	 * than ThotspotLimit. For any invalid usSoftwareShutdownTemp,
+	 * we will just use the max possible setting VEGA10_THERMAL_MAXIMUM_ALERT_TEMP
+	 * to avoid false alarms.
+	 */
+	if ((tdp_table->usSoftwareShutdownTemp >
+	     range->hotspot_crit_max / PP_TEMPERATURE_UNITS_PER_CENTIGRADES)) {
+		if (high > tdp_table->usSoftwareShutdownTemp)
+			high = tdp_table->usSoftwareShutdownTemp;
+	}
 
 	if (low > high)
 		return -EINVAL;