Re: [PATCH v2 12/15] ARM: dts: aspeed: align GPIO hog names with dtschema
From: Joel Stanley
Date: Thu Sep 10 2020 - 20:58:24 EST
On Thu, 10 Sep 2020 at 17:59, Krzysztof Kozlowski <krzk@xxxxxxxxxx> wrote:
>
> dtschema for pca95xx expects GPIO hogs to end with 'hog' prefix.
This is a bit ugly. Do we have to go down this path?
>
> Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> ---
> arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 2 +-
> arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts | 16 ++++++++--------
> 2 files changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> index 1fa233d2da26..0aa437486a0d 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> @@ -560,7 +560,7 @@
> gpio-controller;
> #gpio-cells = <2>;
>
> - smbus0 {
> + smbus0-hog {
> gpio-hog;
> gpios = <4 GPIO_ACTIVE_HIGH>;
> output-high;
> diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
> index cb85168f6761..577c211c469e 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
> @@ -827,7 +827,7 @@
> gpio-controller;
> #gpio-cells = <2>;
>
> - smbus0 {
> + smbus0-hog {
> gpio-hog;
> gpios = <4 GPIO_ACTIVE_HIGH>;
> output-high;
> @@ -852,7 +852,7 @@
> gpio-controller;
> #gpio-cells = <2>;
>
> - smbus1 {
> + smbus1-hog {
> gpio-hog;
> gpios = <4 GPIO_ACTIVE_HIGH>;
> output-high;
> @@ -900,7 +900,7 @@
> gpio-controller;
> #gpio-cells = <2>;
>
> - smbus2 {
> + smbus2-hog {
> gpio-hog;
> gpios = <4 GPIO_ACTIVE_HIGH>;
> output-high;
> @@ -925,7 +925,7 @@
> gpio-controller;
> #gpio-cells = <2>;
>
> - smbus3 {
> + smbus3-hog {
> gpio-hog;
> gpios = <4 GPIO_ACTIVE_HIGH>;
> output-high;
> @@ -992,7 +992,7 @@
> gpio-controller;
> #gpio-cells = <2>;
>
> - smbus4 {
> + smbus4-hog {
> gpio-hog;
> gpios = <4 GPIO_ACTIVE_HIGH>;
> output-high;
> @@ -1017,7 +1017,7 @@
> gpio-controller;
> #gpio-cells = <2>;
>
> - smbus5 {
> + smbus5-hog {
> gpio-hog;
> gpios = <4 GPIO_ACTIVE_HIGH>;
> output-high;
> @@ -1065,7 +1065,7 @@
> gpio-controller;
> #gpio-cells = <2>;
>
> - smbus6 {
> + smbus6-hog {
> gpio-hog;
> gpios = <4 GPIO_ACTIVE_HIGH>;
> output-high;
> @@ -1090,7 +1090,7 @@
> gpio-controller;
> #gpio-cells = <2>;
>
> - smbus7 {
> + smbus7-hog {
> gpio-hog;
> gpios = <4 GPIO_ACTIVE_HIGH>;
> output-high;
> --
> 2.17.1
>