[PATCH 1/3] hwmon: (adm9240) Use loops to avoid duplicated code

[Chris Packham]

Use loops for reading temp_max and initialising FAN_MIN/TEMP_MAX rather
than duplicating code.

Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
---
 drivers/hwmon/adm9240.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c
index 496d47490e10..f95dde1b9c7f 100644
--- a/drivers/hwmon/adm9240.c
+++ b/drivers/hwmon/adm9240.c
@@ -223,10 +223,10 @@ static struct adm9240_data *adm9240_update_device(struct device *dev)
 			data->fan_min[i] = i2c_smbus_read_byte_data(client,
 					ADM9240_REG_FAN_MIN(i));
 		}
-		data->temp_max[0] = i2c_smbus_read_byte_data(client,
-				ADM9240_REG_TEMP_MAX(0));
-		data->temp_max[1] = i2c_smbus_read_byte_data(client,
-				ADM9240_REG_TEMP_MAX(1));
+		for (i = 0; i < 2; i++) {
+			data->temp_max[i] = i2c_smbus_read_byte_data(client,
+					ADM9240_REG_TEMP_MAX(i));
+		}
 
 		/* read fan divs and 5-bit VID */
 		i = i2c_smbus_read_byte_data(client, ADM9240_REG_VID_FAN_DIV);
@@ -687,14 +687,14 @@ static void adm9240_init_client(struct i2c_client *client)
 			i2c_smbus_write_byte_data(client,
 					ADM9240_REG_IN_MAX(i), 255);
 		}
-		i2c_smbus_write_byte_data(client,
-				ADM9240_REG_FAN_MIN(0), 255);
-		i2c_smbus_write_byte_data(client,
-				ADM9240_REG_FAN_MIN(1), 255);
-		i2c_smbus_write_byte_data(client,
-				ADM9240_REG_TEMP_MAX(0), 127);
-		i2c_smbus_write_byte_data(client,
-				ADM9240_REG_TEMP_MAX(1), 127);
+		for (i = 0; i < 2; i++) {
+			i2c_smbus_write_byte_data(client,
+					ADM9240_REG_FAN_MIN(i), 255);
+		}
+		for (i = 0; i < 2; i++) {
+			i2c_smbus_write_byte_data(client,
+					ADM9240_REG_TEMP_MAX(i), 127);
+		}
 
 		/* start measurement cycle */
 		i2c_smbus_write_byte_data(client, ADM9240_REG_CONFIG, 1);
-- 
2.28.0