[PATCH 1/3] iio: dma-buffer: Kconfig: Provide titles for IIO DMA Kconfig symbols

From: Alexandru Ardelean
Date: Thu Sep 24 2020 - 07:18:29 EST


For some embedded systems, a workflow involving external kernel modules
that implement IIO devices is more practical than working with in-tree
sources.

Kconfig symbols without any titles do not show up in menuconfig, and as
such are more difficult to configure granularly, as they need to be
selected by potentially unused/un-needed drivers.

This change adds titles to the IIO DMA Kconfig symbols to address this.

This change also updates DMAengine -> DMAEngine, which is the
correct/nitpick-y name of the framework.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
---
drivers/iio/buffer/Kconfig | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/buffer/Kconfig b/drivers/iio/buffer/Kconfig
index 63f265c8b466..747d21f84188 100644
--- a/drivers/iio/buffer/Kconfig
+++ b/drivers/iio/buffer/Kconfig
@@ -11,7 +11,7 @@ config IIO_BUFFER_CB
usage. That is, those where the data is pushed to the consumer.

config IIO_BUFFER_DMA
- tristate
+ tristate "Industrial I/O DMA buffer infrastructure"
help
Provides the generic IIO DMA buffer infrastructure that can be used by
drivers for devices with DMA support to implement the IIO buffer.
@@ -20,13 +20,13 @@ config IIO_BUFFER_DMA
infrastructure.

config IIO_BUFFER_DMAENGINE
- tristate
+ tristate "Industrial I/O DMA buffer integration with DMAEngine"
select IIO_BUFFER_DMA
help
Provides a bonding of the generic IIO DMA buffer infrastructure with the
- DMAengine framework. This can be used by converter drivers with a DMA port
+ DMAEngine framework. This can be used by converter drivers with a DMA port
connected to an external DMA controller which is supported by the
- DMAengine framework.
+ DMAEngine framework.

Should be selected by drivers that want to use this functionality.

--
2.25.1