Re: [PATCH] arm64: dts: zynqmp: Rename buses to be align with simple-bus yaml

From: Michal Simek
Date: Tue Sep 29 2020 - 06:57:22 EST


po 24. 8. 2020 v 12:05 odesílatel Michal Simek <michal.simek@xxxxxxxxxx> napsal:
>
> Rename amba-apu and amba to AXI. Based on Xilinx ZynqMP TRM (Chapter 15)
> chip is "using the advanced eXtensible interface (AXI) point-to-point
> channels for communicating addresses, data, and response transactions
> between master and slave clients."
>
> Issues are reported as:
> ...: amba: $nodename:0: 'amba' does not match
> '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
> From schema: .../dt-schema/dtschema/schemas/simple-bus.yaml
> ...: amba-apu@0: $nodename:0: 'amba-apu@0' does not match
> '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
> From schema: .../dt-schema/dtschema/schemas/simple-bus.yaml
>
> Signed-off-by: Michal Simek <michal.simek@xxxxxxxxxx>
> ---
>
> The only one problem with this patch is that it breaks paths in
> /proc/device-tree/.
> ---
> arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> index 165a95a106c8..98073f3223e5 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> @@ -182,7 +182,7 @@ fpga_full: fpga-full {
> ranges;
> };
>
> - amba_apu: amba-apu@0 {
> + amba_apu: axi@0 {
> compatible = "simple-bus";
> #address-cells = <2>;
> #size-cells = <1>;
> @@ -201,7 +201,7 @@ gic: interrupt-controller@f9010000 {
> };
> };
>
> - amba: amba {
> + amba: axi {
> compatible = "simple-bus";
> #address-cells = <2>;
> #size-cells = <2>;
> --
> 2.28.0
>

Applied.
M

--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs