Re: ACPI _CST introduced performance regresions on Haswll

[Mel Gorman]

On Tue, Oct 06, 2020 at 09:29:24PM +0200, Rafael J. Wysocki wrote:
> > After the commit, the default_status file does not appear in /sys
> > 
> Something is amiss, then, because the commit doesn't affect the presence of
> this file.
> 

This was cleared up in another mail.

> The only thing it does is to set the use_acpi flag for several processor
> models in intel_idle.c.
> 
> It can be effectively reversed by removing all of the ".use_acpi = true,"
> lines from intel_idle.c.
> 
> In particular, please check if changing the value of use_acpi in struct
> idle_cpu_hsx from 'true' to 'false' alone (without reverting the commit)
> makes the issue go away in 5.9-rc8 (the default_status file should be
> present regardless).
> 

Thanks.  I applied the following

diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c
index 9a810e4a7946..6478347669a9 100644
--- a/drivers/idle/intel_idle.c
+++ b/drivers/idle/intel_idle.c
@@ -1044,7 +1044,7 @@ static const struct idle_cpu idle_cpu_hsw __initconst = {
 static const struct idle_cpu idle_cpu_hsx __initconst = {
 	.state_table = hsw_cstates,
 	.disable_promotion_to_c1e = true,
-	.use_acpi = true,
+	.use_acpi = false,
 };

netperf UDP_STREAM
                                      pre                 enable                 enable                5.9-rc8                5.9-rc8
                                      cst                    cst        cst-no-hsx-acpi                vanilla            no-hsx-acpi
Hmean     send-64       203.96 (   0.00%)      179.23 * -12.13%*      201.04 (  -1.44%)      203.24 (  -0.36%)      233.43 *  14.45%*
Hmean     send-128      403.66 (   0.00%)      355.99 * -11.81%*      402.28 (  -0.34%)      387.65 *  -3.97%*      461.47 *  14.32%*
Hmean     send-256      784.39 (   0.00%)      697.78 * -11.04%*      782.15 (  -0.29%)      758.49 *  -3.30%*      895.31 *  14.14%*
Hmean     recv-64       203.96 (   0.00%)      179.23 * -12.13%*      201.04 (  -1.44%)      203.24 (  -0.36%)      233.43 *  14.45%*
Hmean     recv-128      403.66 (   0.00%)      355.99 * -11.81%*      402.28 (  -0.34%)      387.65 *  -3.97%*      461.47 *  14.32%*
Hmean     recv-256      784.39 (   0.00%)      697.78 * -11.04%*      782.15 (  -0.29%)      758.49 *  -3.30%*      895.28 *  14.14%*

This is a more limited run to save time but is enough to illustrate
the point.

pre-cst is just before your patch
enable-cst is your patch that was bisected
enable-cst-no-hsx-acpi is your patch with use_acpi disabled
5.9-rc8-vanilla is what it sounds like
5.9-rc8-no-hsx-acpi disables use_acpi

The enable-cst-no-hsx-acpi result indicates that use_acpi was the issue for
Haswell (at least these machines). Looking just at 5.9-rc8-vanillaa might
have been misleading because its performance is not far off the baseline
due to unrelated changes that mostly offset the performance penalty.

The key question is -- how appropriate would it be to disable acpi for
Haswell? Would that be generally safe or could it hide other surprises?

-- 
Mel Gorman
SUSE Labs