[PATCH 2/3] i2c: meson: keep peripheral clock enabled

From: Jerome Brunet
Date: Wed Oct 07 2020 - 04:08:25 EST


SCL rate appears to be different than what is expected. For example,
We get 164kHz on i2c3 of the vim3 when 400kHz is expected. This is
partially due to the peripheral clock being disabled when the clock is
set.

Let's keep the peripheral clock on after probe to fix the problem. This
does not affect the SCL output which is still gated when i2c is idle.

Fixes: 09af1c2fa490 ("i2c: meson: set clock divider in probe instead of setting it for each transfer")
Signed-off-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-meson.c | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/i2c/busses/i2c-meson.c b/drivers/i2c/busses/i2c-meson.c
index dac0d2a00cec..e7ec2ab2a220 100644
--- a/drivers/i2c/busses/i2c-meson.c
+++ b/drivers/i2c/busses/i2c-meson.c
@@ -370,16 +370,12 @@ static int meson_i2c_xfer_messages(struct i2c_adapter *adap,
struct meson_i2c *i2c = adap->algo_data;
int i, ret = 0;

- clk_enable(i2c->clk);
-
for (i = 0; i < num; i++) {
ret = meson_i2c_xfer_msg(i2c, msgs + i, i == num - 1, atomic);
if (ret)
break;
}

- clk_disable(i2c->clk);
-
return ret ?: i;
}

@@ -448,7 +444,7 @@ static int meson_i2c_probe(struct platform_device *pdev)
return ret;
}

- ret = clk_prepare(i2c->clk);
+ ret = clk_prepare_enable(i2c->clk);
if (ret < 0) {
dev_err(&pdev->dev, "can't prepare clock\n");
return ret;
@@ -470,7 +466,7 @@ static int meson_i2c_probe(struct platform_device *pdev)

ret = i2c_add_adapter(&i2c->adap);
if (ret < 0) {
- clk_unprepare(i2c->clk);
+ clk_disable_unprepare(i2c->clk);
return ret;
}

@@ -488,7 +484,7 @@ static int meson_i2c_remove(struct platform_device *pdev)
struct meson_i2c *i2c = platform_get_drvdata(pdev);

i2c_del_adapter(&i2c->adap);
- clk_unprepare(i2c->clk);
+ clk_disable_unprepare(i2c->clk);

return 0;
}
--
2.25.4