Re: [PATCH 2/2] Arm: dts: aspeed-g6: Add sgpio node and pinctrl setting

[Billy Tsai]

Hi Joel,

On 2020/10/8, 11:49 AM, Joel Stanley wrote:

    On Thu, 8 Oct 2020 at 01:51, Billy Tsai <billy_tsai@xxxxxxxxxxxxxx> wrote:
    > >
    > > This patch is used to add sgpiom and sgpios nodes and add pinctrl setting
    > > for sgpiom1
    > 
    > The code looks good Billy.
    > 
    > Please split the change in two: device tree changes (arch/arm/dts) in
    > one, and pinctrl in the second, as they go through different
    > maintainers.
    > 

    If I split the change in two, the patch of dts will have a compiler error.
    Because that the sgpiom1 node needs the pinctrl symbol "&pinctrl_sgpm2_default".

    > You also need to update the device tree bindings in Documentation with
    > the new compatible strings:
    > 
    >  Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt
    > 
    > That should go in it's own patch too.
    > 
    > > --- a/arch/arm/boot/dts/aspeed-g6.dtsi
    > > +++ b/arch/arm/boot/dts/aspeed-g6.dtsi
    > > @@ -366,6 +366,58 @@
    > >                                 #interrupt-cells = <2>;
    > >                         };
    > >
    > > +                       sgpiom0: sgpiom@1e780500 {
    > > +                               #gpio-cells = <2>;
    > > +                               gpio-controller;
    > > +                               compatible = "aspeed,ast2600-sgpiom";
    > 
    > This is interesting. I didn't realise the sgpio driver we have in the
    > mainline kernel tree (drivers/gpio/gpio-aspeed-sgpio.c) is for the
    > sgpio master device. It might be best to update the naming of the
    > ast2400/ast2500 compatible in the future.
    > 
    > > +                               reg = <0x1e780500 0x100>;
    > > +                               interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
    > > +                               ngpios = <128>;
    > > +                               clocks = <&syscon ASPEED_CLK_APB2>;
    > > +                               interrupt-controller;
    > > +                               bus-frequency = <12000000>;
    > > +
    > > +                               pinctrl-names = "default";
    > > +                               pinctrl-0 = <&pinctrl_sgpm1_default>;
    > > +                               status = "disabled";
    > > +                       };
    > 
    > >                         gpio1: gpio@1e780800 {
    > >                                 #gpio-cells = <2>;
    > >                                 gpio-controller;
    > > @@ -377,6 +429,7 @@
    > >                                 clocks = <&syscon ASPEED_CLK_APB1>;
    > >                                 interrupt-controller;
    > >                                 #interrupt-cells = <2>;
    > > +                               status = "disabled";
    > 
    > This should be in a different patch set, as it will break all of the
    > systems that expect GPIO to be enabled (which is all of them).
    > 
    > Considering all of them expect this gpio bank to be enabled, should we
    > leave it enabled here?
    > 
    > 
    > >                         };
    > >
    > >                         rtc: rtc@1e781000 {
    > > diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
    > > index 34803a6c7664..b673a44ffa3b 100644
    > > --- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
    > > +++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
    > > @@ -46,8 +46,10 @@
    > >  #define SCU620         0x620 /* Disable GPIO Internal Pull-Down #4 */
    > >  #define SCU634         0x634 /* Disable GPIO Internal Pull-Down #5 */
    > >  #define SCU638         0x638 /* Disable GPIO Internal Pull-Down #6 */
    > > +#define SCU690         0x690 /* Multi-function Pin Control #24 */
    > >  #define SCU694         0x694 /* Multi-function Pin Control #25 */
    > >  #define SCU69C         0x69C /* Multi-function Pin Control #27 */
    > > +#define SCU6D0         0x6D0 /* Multi-function Pin Control #28 */
    > >  #define SCUC20         0xC20 /* PCIE configuration Setting Control */
    > >
    > >  #define ASPEED_G6_NR_PINS 256
    > > @@ -81,13 +83,21 @@ FUNC_GROUP_DECL(I2C12, L26, K24);
    > >  #define K26 4
    > >  SIG_EXPR_LIST_DECL_SESG(K26, MACLINK1, MACLINK1, SIG_DESC_SET(SCU410, 4));
    > >  SIG_EXPR_LIST_DECL_SESG(K26, SCL13, I2C13, SIG_DESC_SET(SCU4B0, 4));
    > > -PIN_DECL_2(K26, GPIOA4, MACLINK1, SCL13);
    > > +/*SGPM2 is A1 Only */
    > > +SIG_EXPR_LIST_DECL_SESG(K26, SGPM2CLK, SGPM2, SIG_DESC_SET(SCU6D0, 4),
    > > +                         SIG_DESC_CLEAR(SCU410, 4), SIG_DESC_CLEAR(SCU4B0, 4),
    > > +                         SIG_DESC_CLEAR(SCU690, 4));
    > > +PIN_DECL_3(K26, GPIOA4, SGPM2CLK, MACLINK1, SCL13);
    > >  FUNC_GROUP_DECL(MACLINK1, K26);
    > >
    > >  #define L24 5
    > >  SIG_EXPR_LIST_DECL_SESG(L24, MACLINK2, MACLINK2, SIG_DESC_SET(SCU410, 5));
    > >  SIG_EXPR_LIST_DECL_SESG(L24, SDA13, I2C13, SIG_DESC_SET(SCU4B0, 5));
    > > -PIN_DECL_2(L24, GPIOA5, MACLINK2, SDA13);
    > > +/*SGPM2 is A1 Only */
    > > +SIG_EXPR_LIST_DECL_SESG(L24, SGPM2LD, SGPM2, SIG_DESC_SET(SCU6D0, 5),
    > > +                         SIG_DESC_CLEAR(SCU410, 5), SIG_DESC_CLEAR(SCU4B0, 5),
    > > +                         SIG_DESC_CLEAR(SCU690, 5));
    > > +PIN_DECL_3(L24, GPIOA5, SGPM2LD, MACLINK2, SDA13);
    > >  FUNC_GROUP_DECL(MACLINK2, L24);
    > >
    > >  FUNC_GROUP_DECL(I2C13, K26, L24);
    > > @@ -95,16 +105,26 @@ FUNC_GROUP_DECL(I2C13, K26, L24);
    > >  #define L23 6
    > >  SIG_EXPR_LIST_DECL_SESG(L23, MACLINK3, MACLINK3, SIG_DESC_SET(SCU410, 6));
    > >  SIG_EXPR_LIST_DECL_SESG(L23, SCL14, I2C14, SIG_DESC_SET(SCU4B0, 6));
    > > -PIN_DECL_2(L23, GPIOA6, MACLINK3, SCL14);
    > > +/*SGPM2 is A1 Only */
    > > +SIG_EXPR_LIST_DECL_SESG(L23, SGPM2O, SGPM2, SIG_DESC_SET(SCU6D0, 6),
    > > +                         SIG_DESC_CLEAR(SCU410, 6), SIG_DESC_CLEAR(SCU4B0, 6),
    > > +                         SIG_DESC_CLEAR(SCU690, 6));
    > > +PIN_DECL_3(L23, GPIOA6, SGPM2O, MACLINK3, SCL14);
    > >  FUNC_GROUP_DECL(MACLINK3, L23);
    > >
    > >  #define K25 7
    > >  SIG_EXPR_LIST_DECL_SESG(K25, MACLINK4, MACLINK4, SIG_DESC_SET(SCU410, 7));
    > >  SIG_EXPR_LIST_DECL_SESG(K25, SDA14, I2C14, SIG_DESC_SET(SCU4B0, 7));
    > > -PIN_DECL_2(K25, GPIOA7, MACLINK4, SDA14);
    > > +/*SGPM2 is A1 Only */
    > > +SIG_EXPR_LIST_DECL_SESG(K25, SGPM2I, SGPM2, SIG_DESC_SET(SCU6D0, 7),
    > > +                         SIG_DESC_CLEAR(SCU410, 7), SIG_DESC_CLEAR(SCU4B0, 7),
    > > +                         SIG_DESC_CLEAR(SCU690, 7));
    > > +PIN_DECL_3(K25, GPIOA7, SGPM2I, MACLINK4, SDA14);
    > >  FUNC_GROUP_DECL(MACLINK4, K25);
    > >
    > >  FUNC_GROUP_DECL(I2C14, L23, K25);
    > > +/*SGPM2 is A1 Only */
    > > +FUNC_GROUP_DECL(SGPM2, K26, L24, L23, K25);
    > >
    > >  #define J26 8
    > >  SIG_EXPR_LIST_DECL_SESG(J26, SALT1, SALT1, SIG_DESC_SET(SCU410, 8));
    > > @@ -2060,6 +2080,7 @@ static const struct aspeed_pin_group aspeed_g6_groups[] = {
    > >         ASPEED_PINCTRL_GROUP(EMMCG4),
    > >         ASPEED_PINCTRL_GROUP(EMMCG8),
    > >         ASPEED_PINCTRL_GROUP(SGPM1),
    > > +       ASPEED_PINCTRL_GROUP(SGPM2),
    > >         ASPEED_PINCTRL_GROUP(SGPS1),
    > >         ASPEED_PINCTRL_GROUP(SIOONCTRL),
    > >         ASPEED_PINCTRL_GROUP(SIOPBI),
    > > @@ -2276,6 +2297,7 @@ static const struct aspeed_pin_function aspeed_g6_functions[] = {
    > >         ASPEED_PINCTRL_FUNC(SD1),
    > >         ASPEED_PINCTRL_FUNC(SD2),
    > >         ASPEED_PINCTRL_FUNC(SGPM1),
    > > +       ASPEED_PINCTRL_FUNC(SGPM2),
    > >         ASPEED_PINCTRL_FUNC(SGPS1),
    > >         ASPEED_PINCTRL_FUNC(SIOONCTRL),
    > >         ASPEED_PINCTRL_FUNC(SIOPBI),
    > > --
    > > 2.17.1
    > >