Re: [PATCH v3 2/2] arm64: dts: rockchip: Add basic support for Kobol's Helios64

From: Uwe Kleine-König
Date: Tue Oct 13 2020 - 16:22:37 EST


Hello Johan,

On 10/13/20 7:34 PM, Johan Jonker wrote:
> Part 1 of 2 missing here.

Please complain to gmail then, given that patch 1 can be found on
https://lore.kernel.org/linux-arm-kernel/20201013161340.720403-2-uwe@xxxxxxxxxxxxxxxxx/.

> Submit all patches to all maintainers and mail lists.
> Don't forget robh+dt !

I'm really surprised you insist here. In my experience Rob (with his
dt-hat on) is not interested in specifics of the machine files and he
already acked patch 1.

> Add a little change log here.

I assume you also didn't get the cover letter?

>> + fault-led {
> fault_led: led-0 {}
>
> My fault.
> Change ones more...
> # The first form is preferred, but fall back to just 'led' anywhere in the
> # node name to at least catch some child nodes.
> "(^led-[0-9a-f]$|led)":

ok, the label isn't necessary, is it?

>> + label = "helios64:green:status";
>> + gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
>
>> + linux,default-trigger = "none";
>
> Don't use 'none' for mainline.

Oh, I missed that. Thanks for your persistence.

>> + default-state = "on";
>> + };
>> + };
>> +
>> + vcc1v8_sys_s0: vcc1v8-sys-s0 {
>> + compatible = "regulator-fixed";
>> + regulator-name = "vcc1v8_sys_s0";
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + vin-supply = <&vcc1v8_sys_s3>;
>> + };
>> +
>> + vcc3v0_sd: vcc3v0-sd {
>> + compatible = "regulator-fixed";
>> + regulator-name = "vcc3v0_sd";
>
> Doesn't a sd card need a on/off gpio?
> Could you check the schematics?

Hmm, there is a GPIO. I didn't consider a problem there given that the
machine logs

[ 31.708706] vcc3v0_sd: disabling

when there is no SD-card in the slot. Will investigate further.

>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pmic_int_l>;
>
> sort

I would expect this is an exception from the sorting rule.

$ git grep pinctrl-names linus/master:arch/arm64/boot/dts/ | wc -l
1905

$ git grep -A1 pinctrl-names linus/master:arch/arm64/boot/dts/ | \
grep pinctrl-0 | wc -l
1412

When grepping over arch/arm64/boot/dts/rockchip the numbers are
453 and 445 respectively.

Will use pinctrl-names above pinctrl-0 consistently.

>> + regulator-max-microvolt = <1350000>;
>> + regulator-min-microvolt = <750000>;
>
>
> The rest has min above max.
> Exception to the sort rule, not sure what Heiko wants, but keep it every
> where the same.

OK, most rockchip dts have min before max, will fix up.

>> + i2c-scl-rising-time-ns = <160>;
>> + i2c-scl-falling-time-ns = <30>;
>
> sort

I consider it logical to have rise before fall. In 43 of 59 cases in
arch/arm64/boot/dts/rockchip/ it is done this way.

>> + vqmmc-supply = <&vcc1v8_sys_s0>;
>> + status = "okay";
>> +};
>> +
>> +&sdmmc {
>> + bus-width = <4>;
>> + cap-sd-highspeed;
>
>> + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
>
> see regulator?

GPIO0_A7 is the card detect line. I don't understand your question. Is
it the same as above, i.e. that it should be possible that the SD
regulator can be disabled?

>> + disable-wp;
>> + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
>> + pinctrl-names = "default";
>> + vmmc-supply = <&vcc3v0_sd>;
>> + vqmmc-supply = <&vcc_sdio_s0>;
>> + status = "okay";
>> +};

Best regards
Uwe

Attachment: signature.asc
Description: OpenPGP digital signature