[PATCH v2] power: suspend: Replace dpm_watchdog by sleep timer

[josephjang]

> > On Wed, Oct 21, 2020 at 4:09 AM Joseph Jang <josephjang@xxxxxxxxxx>  
> wrote:
> > >
> > > Since dpm_watchdog just cover device power management, we proposed  
> sleep
> > > timer to cover not only device power management hang issues, but also
> > > core power management hand issue.
> > >
> > > Add sleep timer and timeout handler to prevent device stuck during  
> suspend/
> > > resume process. The timeout handler will dump disk sleep task at first
> > > round timeout and trigger kernel panic at second round timeout.
> > > The default timer for each round is defined in
> > > CONFIG_PM_SLEEP_TIMER_TIMEOUT.
> >
> > Let me repeat the point that Greg has made already: Please don't
> > replace the existing watchdog with something else, but try to extend
> > it to cover your use case.
> >
> > As it stands, the patch is not applicable IMV.
> >
> > Thanks!

> Thank you Rafael's promptly response.
> Since dmp_watchdog was implement in drivers/base/power/main.c and it use  
> stack memory for timer struct.
> It is a little bit hard to use its API in kernel/power/suspend.c.
> And from the call flow, we prefer to start/stop watchog timer in  
> suspend.c only. It will also cover device
> power management as well.

> If you don't want to change Kconfig, I can keep original DPM_WATCHDOG.
> But it is not easy to extend driver base API into core power base. Am I  
> correct?

> If you have some suggestion, please feel free to let me know, I will  
> follow up.

> Thank you,
> Joseph.


Let me try to explain why cannot use current dpm_watchdog API, because it  
use stack memory and has limitation.

/**
 * dpm_watchdog_set - Enable pm watchdog for given device.
 * @wd: Watchdog. Must be allocated on the stack.
 * @dev: Device to handle.
 */
static void dpm_watchdog_set(struct dpm_watchdog *wd, struct device *dev)
{
	struct timer_list *timer = &wd->timer;

	wd->dev = dev;
	wd->tsk = current;

	timer_setup_on_stack(timer, dpm_watchdog_handler, 0);  <== setup timer on  
stack memory ....
	/* use same timeout value for both suspend and resume */
	timer->expires = jiffies + HZ * CONFIG_DPM_WATCHDOG_TIMEOUT;
	add_timer(timer);
}


If you could take a look at my patch again, you can see we need to start  
watchdog at end of function like s2idle_enter().
We cannot use stack memory for timer because it will be free when go back  
to caller.
That is why I am creating new API to start/stop watchdog timer which use  
global memory.

 /**
  * pm_suspend_default_s2idle - Check if suspend-to-idle is the default  
suspend.
  *
@@ -89,6 +92,8 @@ static void s2idle_enter(void)
 {
 	trace_suspend_resume(TPS("machine_suspend"), PM_SUSPEND_TO_IDLE, true);

+	stop_sleep_timer(&st);
+
 	raw_spin_lock_irq(&s2idle_lock);
 	if (pm_wakeup_pending())
 		goto out;
@@ -114,6 +119,8 @@ static void s2idle_enter(void)
 	s2idle_state = S2IDLE_STATE_NONE;
 	raw_spin_unlock_irq(&s2idle_lock);

+	start_sleep_timer(&st);
+
 	trace_suspend_resume(TPS("machine_suspend"), PM_SUSPEND_TO_IDLE, false);
 }


Base on that, could you help to review if we could create new API to  
start/stop watchdog timer for core power management?

Thank you,
Joseph.