Re: [PATCH] pinctrl: amd: print debounce filter info in debugfs

[Andy Shevchenko]

On Sat, Oct 24, 2020 at 2:32 PM Coiby Xu <coiby.xu@xxxxxxxxx> wrote:
>
> Print out the status of debounce filter as follows,
> $ cat /sys/kernel/debug/gpio|grep pin130
> pin130          interrupt is disabled| interrupt is masked| disable wakeup in S0i3 state| disable wakeup in S3 state|
>  disable wakeup in S4/S5 state| input is high|   pull-up is disabled| Pull-down is disabled|   output is disabled| debouncing filter (high) enabled| debouncing timeout is 124800 (us)| 0x503c8


> +                               if (!tmr_large) {
> +                                       if (!tmr_out_unit)
> +                                               unit = 61;
> +                                       else
> +                                               unit = 244;
> +                               } else {
> +                                       if (!tmr_out_unit)
> +                                               unit = 15600;
> +                                       else
> +                                               unit = 62500;
> +                               }

In all three if:s can you use positive conditionals?

-- 
With Best Regards,
Andy Shevchenko