[PATCH v2 2/2] regulator: Add support for DA9121 regulator

From: Vincent Whitchurch
Date: Tue Nov 03 2020 - 05:00:32 EST


Add support for the Dialog Semiconductor DA9121, a single-channel
dual-phase buck converter controlled via I2C.

Signed-off-by: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
---
drivers/regulator/Kconfig | 12 +++
drivers/regulator/Makefile | 1 +
drivers/regulator/da9121-regulator.c | 108 +++++++++++++++++++++++++++
3 files changed, 121 insertions(+)
create mode 100644 drivers/regulator/da9121-regulator.c

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 020a00d6696b..005a6036dd38 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -303,6 +303,18 @@ config REGULATOR_DA9063
This driver can also be built as a module. If so, the module
will be called da9063-regulator.

+config REGULATOR_DA9121
+ tristate "Dialog Semiconductor DA9121 regulator"
+ depends on I2C && OF
+ select REGMAP_I2C
+ help
+ Say y here to support for the Dialog Semiconductor DA9121. The
+ DA9210 is a dual-phase buck converter controlled through an I2C
+ interface.
+
+ This driver can also be built as a module. If so, the module
+ will be called da9121-regulator.
+
config REGULATOR_DA9210
tristate "Dialog Semiconductor DA9210 regulator"
depends on I2C
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 6ebae516258e..6096862a1d60 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -38,6 +38,7 @@ obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o
obj-$(CONFIG_REGULATOR_DA9055) += da9055-regulator.o
obj-$(CONFIG_REGULATOR_DA9062) += da9062-regulator.o
obj-$(CONFIG_REGULATOR_DA9063) += da9063-regulator.o
+obj-$(CONFIG_REGULATOR_DA9121) += da9121-regulator.o
obj-$(CONFIG_REGULATOR_DA9210) += da9210-regulator.o
obj-$(CONFIG_REGULATOR_DA9211) += da9211-regulator.o
obj-$(CONFIG_REGULATOR_DBX500_PRCMU) += dbx500-prcmu.o
diff --git a/drivers/regulator/da9121-regulator.c b/drivers/regulator/da9121-regulator.c
new file mode 100644
index 000000000000..66bdfd1979c0
--- /dev/null
+++ b/drivers/regulator/da9121-regulator.c
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright (C) 2020 Axis Communications AB */
+
+#include <linux/of_device.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/driver.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+
+#define DA9121_BUCK_BUCK1_0 0x20
+#define DA9121_BUCK_BUCK1_0_CH1_EN BIT(0)
+
+#define DA9121_BUCK_BUCK1_5 0x25
+#define DA9121_BUCK_BUCK1_5_CH1_A_VOUT GENMASK(7, 0)
+
+#define DA9121_MIN_MV 300
+#define DA9121_MAX_MV 1900
+#define DA9121_STEP_MV 10
+#define DA9121_MIN_SEL (DA9121_MIN_MV / DA9121_STEP_MV)
+#define DA9121_N_VOLTAGES (((DA9121_MAX_MV - DA9121_MIN_MV) / DA9121_STEP_MV) \
+ + 1 + DA9121_MIN_SEL)
+
+static const struct regmap_config da9121_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
+static const struct regulator_ops da9121_buck_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+};
+
+static const struct regulator_desc da9121_reg = {
+ .name = "da9121",
+ .of_match = "buck1",
+ .owner = THIS_MODULE,
+ .ops = &da9121_buck_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = DA9121_N_VOLTAGES,
+ .min_uV = DA9121_MIN_MV * 1000,
+ .uV_step = DA9121_STEP_MV * 1000,
+ .linear_min_sel = DA9121_MIN_SEL,
+ .vsel_reg = DA9121_BUCK_BUCK1_5,
+ .vsel_mask = DA9121_BUCK_BUCK1_5_CH1_A_VOUT,
+ .enable_reg = DA9121_BUCK_BUCK1_0,
+ .enable_mask = DA9121_BUCK_BUCK1_0_CH1_EN,
+ /* Default value of BUCK_BUCK1_0.CH1_SRC_DVC_UP */
+ .ramp_delay = 20000,
+ /* tBUCK_EN */
+ .enable_time = 20,
+};
+
+static const struct of_device_id da9121_dt_ids[] = {
+ { .compatible = "dlg,da9121", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, da9121_dt_ids);
+
+static int da9121_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &i2c->dev;
+ struct regulator_config config = {};
+ struct regulator_dev *rdev;
+ struct regmap *regmap;
+
+ regmap = devm_regmap_init_i2c(i2c, &da9121_regmap_config);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ config.dev = &i2c->dev;
+ config.of_node = dev->of_node;
+ config.regmap = regmap;
+
+ rdev = devm_regulator_register(&i2c->dev, &da9121_reg, &config);
+ if (IS_ERR(rdev)) {
+ dev_err(&i2c->dev, "Failed to register da9121 regulator\n");
+ return PTR_ERR(rdev);
+ }
+
+ return 0;
+}
+
+static const struct i2c_device_id da9121_i2c_id[] = {
+ { "da9121", 0 },
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, da9121_i2c_id);
+
+static struct i2c_driver da9121_regulator_driver = {
+ .driver = {
+ .name = "da9121",
+ .of_match_table = of_match_ptr(da9121_dt_ids),
+ },
+ .probe = da9121_i2c_probe,
+ .id_table = da9121_i2c_id,
+};
+
+module_i2c_driver(da9121_regulator_driver);
+
+MODULE_LICENSE("GPL v2");
--
2.28.0