Re: [PATCH net-next v2 04/19] net: phy: at803x: implement generic .handle_interrupt() callback

From: Oleksij Rempel
Date: Wed Nov 04 2020 - 13:09:44 EST


On Sun, Nov 01, 2020 at 02:50:59PM +0200, Ioana Ciornei wrote:
> From: Ioana Ciornei <ioana.ciornei@xxxxxxx>
>
> In an attempt to actually support shared IRQs in phylib, we now move the
> responsibility of triggering the phylib state machine or just returning
> IRQ_NONE, based on the IRQ status register, to the PHY driver. Having
> 3 different IRQ handling callbacks (.handle_interrupt(),
> .did_interrupt() and .ack_interrupt() ) is confusing so let the PHY
> driver implement directly an IRQ handler like any other device driver.
> Make this driver follow the new convention.
>
> Cc: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
> Cc: Michael Walle <michael@xxxxxxxx>
> Signed-off-by: Ioana Ciornei <ioana.ciornei@xxxxxxx>

Tested-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>

> ---
> Changes in v2:
> - adjust .handle_interrupt() so that we only take into account the
> enabled IRQs.
>
> drivers/net/phy/at803x.c | 31 +++++++++++++++++++++++++++++++
> 1 file changed, 31 insertions(+)
>
> diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
> index ed601a7e46a0..c7f91934cf82 100644
> --- a/drivers/net/phy/at803x.c
> +++ b/drivers/net/phy/at803x.c
> @@ -628,6 +628,32 @@ static int at803x_config_intr(struct phy_device *phydev)
> return err;
> }
>
> +static irqreturn_t at803x_handle_interrupt(struct phy_device *phydev)
> +{
> + int irq_status, int_enabled;
> +
> + irq_status = phy_read(phydev, AT803X_INTR_STATUS);
> + if (irq_status < 0) {
> + phy_error(phydev);
> + return IRQ_NONE;
> + }
> +
> + /* Read the current enabled interrupts */
> + int_enabled = phy_read(phydev, AT803X_INTR_ENABLE);
> + if (int_enabled < 0) {
> + phy_error(phydev);
> + return IRQ_NONE;
> + }
> +
> + /* See if this was one of our enabled interrupts */
> + if (!(irq_status & int_enabled))
> + return IRQ_NONE;
> +
> + phy_trigger_machine(phydev);
> +
> + return IRQ_HANDLED;
> +}
> +
> static void at803x_link_change_notify(struct phy_device *phydev)
> {
> /*
> @@ -1064,6 +1090,7 @@ static struct phy_driver at803x_driver[] = {
> .read_status = at803x_read_status,
> .ack_interrupt = at803x_ack_interrupt,
> .config_intr = at803x_config_intr,
> + .handle_interrupt = at803x_handle_interrupt,
> .get_tunable = at803x_get_tunable,
> .set_tunable = at803x_set_tunable,
> .cable_test_start = at803x_cable_test_start,
> @@ -1084,6 +1111,7 @@ static struct phy_driver at803x_driver[] = {
> /* PHY_BASIC_FEATURES */
> .ack_interrupt = at803x_ack_interrupt,
> .config_intr = at803x_config_intr,
> + .handle_interrupt = at803x_handle_interrupt,
> }, {
> /* Qualcomm Atheros AR8031/AR8033 */
> PHY_ID_MATCH_EXACT(ATH8031_PHY_ID),
> @@ -1102,6 +1130,7 @@ static struct phy_driver at803x_driver[] = {
> .aneg_done = at803x_aneg_done,
> .ack_interrupt = &at803x_ack_interrupt,
> .config_intr = &at803x_config_intr,
> + .handle_interrupt = at803x_handle_interrupt,
> .get_tunable = at803x_get_tunable,
> .set_tunable = at803x_set_tunable,
> .cable_test_start = at803x_cable_test_start,
> @@ -1122,6 +1151,7 @@ static struct phy_driver at803x_driver[] = {
> /* PHY_BASIC_FEATURES */
> .ack_interrupt = at803x_ack_interrupt,
> .config_intr = at803x_config_intr,
> + .handle_interrupt = at803x_handle_interrupt,
> .cable_test_start = at803x_cable_test_start,
> .cable_test_get_status = at803x_cable_test_get_status,
> }, {
> @@ -1134,6 +1164,7 @@ static struct phy_driver at803x_driver[] = {
> /* PHY_BASIC_FEATURES */
> .ack_interrupt = &at803x_ack_interrupt,
> .config_intr = &at803x_config_intr,
> + .handle_interrupt = at803x_handle_interrupt,
> .cable_test_start = at803x_cable_test_start,
> .cable_test_get_status = at803x_cable_test_get_status,
> .read_status = at803x_read_status,
> --
> 2.28.0
>
>

--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |