Re: [PATCH] clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9

[Marek Behún]

Also, this is how A3720 WTMI code and ATF determines XTAL clock rate.
No reason for kernel to do it differently.

Reviewed-by: Marek Behún <kabel@xxxxxxxxxx>

On Fri,  6 Nov 2020 11:00:39 +0100
Pali Rohár <pali@xxxxxxxxxx> wrote:

> From: Terry Zhou <bjzhou@xxxxxxxxxxx>
> 
> There is an error in the current code that the XTAL MODE
> pin was set to NB MPP1_31 which should be NB MPP1_9.
> The latch register of NB MPP1_9 has different offset of 0x8.
> 
> Signed-off-by: Terry Zhou <bjzhou@xxxxxxxxxxx>
> [pali: Fix pin name in commit message]
> Signed-off-by: Pali Rohár <pali@xxxxxxxxxx>
> Fixes: 7ea8250406a6 ("clk: mvebu: Add the xtal clock for Armada 3700 SoC")
> Cc: stable@xxxxxxxxxxxxxxx
> 
> ---
> This patch is present in Marvell SDK and also in Marvell's kernel fork:
> https://github.com/MarvellEmbeddedProcessors/linux-marvell/commit/80d4cec4cef8282e5ac3aaf98ce3e68fb299a134
> 
> Konstantin Porotchkin wrote on Github that Gregory Clement was notified
> about this patch, but as this patch is still not in mainline kernel I'm
> sending it again for review.
> 
> In original commit message (only in commit message, not code) was
> specified MPP9 pin on South Bridge, but correct is North Bridge.
> ---
>  drivers/clk/mvebu/armada-37xx-xtal.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/clk/mvebu/armada-37xx-xtal.c b/drivers/clk/mvebu/armada-37xx-xtal.c
> index e9e306d4e9af..41271351cf1f 100644
> --- a/drivers/clk/mvebu/armada-37xx-xtal.c
> +++ b/drivers/clk/mvebu/armada-37xx-xtal.c
> @@ -13,8 +13,8 @@
>  #include <linux/platform_device.h>
>  #include <linux/regmap.h>
>  
> -#define NB_GPIO1_LATCH	0xC
> -#define XTAL_MODE	    BIT(31)
> +#define NB_GPIO1_LATCH	0x8
> +#define XTAL_MODE	    BIT(9)
>  
>  static int armada_3700_xtal_clock_probe(struct platform_device *pdev)
>  {