[PATCH V2] ARM: tegra: Populate OPP table for Tegra20 Ventana

From: Jon Hunter
Date: Thu Nov 12 2020 - 07:52:17 EST


Commit 9ce274630495 ("cpufreq: tegra20: Use generic cpufreq-dt driver
(Tegra30 supported now)") update the Tegra20 CPUFREQ driver to use the
generic CPUFREQ device-tree driver. Since this change CPUFREQ support
on the Tegra20 Ventana platform has been broken because the necessary
device-tree nodes with the operating point information are not populated
for this platform. Fix this by updating device-tree for Venata to
include the operating point informration for Tegra20.

Fixes: 9ce274630495 ("cpufreq: tegra20: Use generic cpufreq-dt driver (Tegra30 supported now)")
Cc: stable@xxxxxxxxxxxxxxx

Signed-off-by: Jon Hunter <jonathanh@xxxxxxxxxx>
---
Changes since V1:
- Remove unneeded 'cpu0' phandle

arch/arm/boot/dts/tegra20-ventana.dts | 11 +++++++++++
1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index b158771ac0b7..1b2a0dcd929a 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -3,6 +3,7 @@

#include <dt-bindings/input/input.h>
#include "tegra20.dtsi"
+#include "tegra20-cpu-opp.dtsi"

/ {
model = "NVIDIA Tegra20 Ventana evaluation board";
@@ -592,6 +593,16 @@ clk32k_in: clock@0 {
#clock-cells = <0>;
};

+ cpus {
+ cpu@0 {
+ operating-points-v2 = <&cpu0_opp_table>;
+ };
+
+ cpu@1 {
+ operating-points-v2 = <&cpu0_opp_table>;
+ };
+ };
+
gpio-keys {
compatible = "gpio-keys";

--
2.25.1