[PATCH v2 27/29] mm/memory_hotplug: extend offline_and_remove_memory() to handle more than one memory block

From: David Hildenbrand
Date: Thu Nov 12 2020 - 08:40:23 EST


virtio-mem soon wants to use offline_and_remove_memory() memory that
exceeds a single Linux memory block (memory_block_size_bytes()). Let's
remove that restriction.

Let's remember the old state and try to restore that if anything goes
wrong. While re-onlining can, in general, fail, it's highly unlikely to
happen (usually only when a notifier fails to allocate memory, and these
are rather rare).

This will be used by virtio-mem to offline+remove memory ranges that are
bigger than a single memory block - for example, with a device block
size of 1 GiB (e.g., gigantic pages in the hypervisor) and a Linux memory
block size of 128MB.

While we could compress the state into 2 bit, using 8 bit is much
easier.

This handling is similar, but different to acpi_scan_try_to_offline():

a) We don't try to offline twice. I am not sure if this CONFIG_MEMCG
optimization is still relevant - it should only apply to ZONE_NORMAL
(where we have no guarantees). If relevant, we can always add it.

b) acpi_scan_try_to_offline() simply onlines all memory in case
something goes wrong. It doesn't restore previous online type. Let's do
that, so we won't overwrite what e.g., user space configured.

Reviewed-by: Wei Yang <richard.weiyang@xxxxxxxxxxxxxxxxx>
Cc: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
Cc: Jason Wang <jasowang@xxxxxxxxxx>
Cc: Pankaj Gupta <pankaj.gupta.linux@xxxxxxxxx>
Cc: Michal Hocko <mhocko@xxxxxxxxxx>
Cc: Oscar Salvador <osalvador@xxxxxxx>
Cc: Wei Yang <richard.weiyang@xxxxxxxxxxxxxxxxx>
Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: David Hildenbrand <david@xxxxxxxxxx>
---
mm/memory_hotplug.c | 105 +++++++++++++++++++++++++++++++++++++-------
1 file changed, 89 insertions(+), 16 deletions(-)

diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index b44d4c7ba73b..217080ca93e5 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -1806,39 +1806,112 @@ int remove_memory(int nid, u64 start, u64 size)
}
EXPORT_SYMBOL_GPL(remove_memory);

+static int try_offline_memory_block(struct memory_block *mem, void *arg)
+{
+ uint8_t online_type = MMOP_ONLINE_KERNEL;
+ uint8_t **online_types = arg;
+ struct page *page;
+ int rc;
+
+ /*
+ * Sense the online_type via the zone of the memory block. Offlining
+ * with multiple zones within one memory block will be rejected
+ * by offlining code ... so we don't care about that.
+ */
+ page = pfn_to_online_page(section_nr_to_pfn(mem->start_section_nr));
+ if (page && zone_idx(page_zone(page)) == ZONE_MOVABLE)
+ online_type = MMOP_ONLINE_MOVABLE;
+
+ rc = device_offline(&mem->dev);
+ /*
+ * Default is MMOP_OFFLINE - change it only if offlining succeeded,
+ * so try_reonline_memory_block() can do the right thing.
+ */
+ if (!rc)
+ **online_types = online_type;
+
+ (*online_types)++;
+ /* Ignore if already offline. */
+ return rc < 0 ? rc : 0;
+}
+
+static int try_reonline_memory_block(struct memory_block *mem, void *arg)
+{
+ uint8_t **online_types = arg;
+ int rc;
+
+ if (**online_types != MMOP_OFFLINE) {
+ mem->online_type = **online_types;
+ rc = device_online(&mem->dev);
+ if (rc < 0)
+ pr_warn("%s: Failed to re-online memory: %d",
+ __func__, rc);
+ }
+
+ /* Continue processing all remaining memory blocks. */
+ (*online_types)++;
+ return 0;
+}
+
/*
- * Try to offline and remove a memory block. Might take a long time to
- * finish in case memory is still in use. Primarily useful for memory devices
- * that logically unplugged all memory (so it's no longer in use) and want to
- * offline + remove the memory block.
+ * Try to offline and remove memory. Might take a long time to finish in case
+ * memory is still in use. Primarily useful for memory devices that logically
+ * unplugged all memory (so it's no longer in use) and want to offline + remove
+ * that memory.
*/
int offline_and_remove_memory(int nid, u64 start, u64 size)
{
- struct memory_block *mem;
- int rc = -EINVAL;
+ const unsigned long mb_count = size / memory_block_size_bytes();
+ uint8_t *online_types, *tmp;
+ int rc;

if (!IS_ALIGNED(start, memory_block_size_bytes()) ||
- size != memory_block_size_bytes())
- return rc;
+ !IS_ALIGNED(size, memory_block_size_bytes()) || !size)
+ return -EINVAL;
+
+ /*
+ * We'll remember the old online type of each memory block, so we can
+ * try to revert whatever we did when offlining one memory block fails
+ * after offlining some others succeeded.
+ */
+ online_types = kmalloc_array(mb_count, sizeof(*online_types),
+ GFP_KERNEL);
+ if (!online_types)
+ return -ENOMEM;
+ /*
+ * Initialize all states to MMOP_OFFLINE, so when we abort processing in
+ * try_offline_memory_block(), we'll skip all unprocessed blocks in
+ * try_reonline_memory_block().
+ */
+ memset(online_types, MMOP_OFFLINE, mb_count);

lock_device_hotplug();
- mem = find_memory_block(__pfn_to_section(PFN_DOWN(start)));
- if (mem)
- rc = device_offline(&mem->dev);
- /* Ignore if the device is already offline. */
- if (rc > 0)
- rc = 0;
+
+ tmp = online_types;
+ rc = walk_memory_blocks(start, size, &tmp, try_offline_memory_block);

/*
- * In case we succeeded to offline the memory block, remove it.
+ * In case we succeeded to offline all memory, remove it.
* This cannot fail as it cannot get onlined in the meantime.
*/
if (!rc) {
rc = try_remove_memory(nid, start, size);
- WARN_ON_ONCE(rc);
+ if (rc)
+ pr_err("%s: Failed to remove memory: %d", __func__, rc);
+ }
+
+ /*
+ * Rollback what we did. While memory onlining might theoretically fail
+ * (nacked by a notifier), it barely ever happens.
+ */
+ if (rc) {
+ tmp = online_types;
+ walk_memory_blocks(start, size, &tmp,
+ try_reonline_memory_block);
}
unlock_device_hotplug();

+ kfree(online_types);
return rc;
}
EXPORT_SYMBOL_GPL(offline_and_remove_memory);
--
2.26.2