Re: [PATCH v2] iio: ad_sigma_delta: Don't put SPI transfer buffer on the stack

From: Jonathan Cameron
Date: Sat Nov 14 2020 - 11:21:12 EST


On Fri, 13 Nov 2020 11:40:59 +0200
Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx> wrote:

> From: Lars-Peter Clausen <lars@xxxxxxxxxx>
>
> Use a heap allocated memory for the SPI transfer buffer. Using stack memory
> can corrupt stack memory when using DMA on some systems.
>
> This change moves the buffer from the stack of the trigger handler call to
> the heap of the buffer of the state struct. The size increases takes into
> account the alignment for the timestamp, which is 8 bytes.
> So the buffer is put at an offset of 8 bytes.
>
> Fixes: af3008485ea03 ("iio:adc: Add common code for ADI Sigma Delta devices")
> Signed-off-by: Lars-Peter Clausen <lars@xxxxxxxxxx>
> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>

There are neater options for solving this problem - see inline.

In particular I don't think you have a problem with setting the
rx and tx buffers to use the same memory.

> ---
>
> Changelog v1 -> v2:
> * bumped the buffer on state struct to 24 bytes
> * increased the offset to 8 bytes to account for the timestamp alignment
>
> drivers/iio/adc/ad_sigma_delta.c | 2 +-
> include/linux/iio/adc/ad_sigma_delta.h | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/iio/adc/ad_sigma_delta.c b/drivers/iio/adc/ad_sigma_delta.c
> index 86039e9ecaca..9f730c9d6aaa 100644
> --- a/drivers/iio/adc/ad_sigma_delta.c
> +++ b/drivers/iio/adc/ad_sigma_delta.c
> @@ -395,9 +395,9 @@ static irqreturn_t ad_sd_trigger_handler(int irq, void *p)
> struct iio_poll_func *pf = p;
> struct iio_dev *indio_dev = pf->indio_dev;
> struct ad_sigma_delta *sigma_delta = iio_device_get_drvdata(indio_dev);
> + uint8_t *data = &sigma_delta->data[8];
> unsigned int reg_size;
> unsigned int data_reg;
> - uint8_t data[16];
>
> memset(data, 0x00, 16);
>
> diff --git a/include/linux/iio/adc/ad_sigma_delta.h b/include/linux/iio/adc/ad_sigma_delta.h
> index a3a838dcf8e4..8fb74755f873 100644
> --- a/include/linux/iio/adc/ad_sigma_delta.h
> +++ b/include/linux/iio/adc/ad_sigma_delta.h
> @@ -80,7 +80,7 @@ struct ad_sigma_delta {
> * DMA (thus cache coherency maintenance) requires the
> * transfer buffers to live in their own cache lines.
> */

If you do end up with something like this, it needs a clear explanation of 'why'
the size is 24 bytes. No good just having it in the patch description.

> - uint8_t data[4] ____cacheline_aligned;
> + uint8_t data[24] ____cacheline_aligned;

This is downright confusing. I'd just split the buffer into tx and rx
parts. The first (doesn't matter which) needs to be marked __cacheline_aligned.
If the rx is second mark it __aligned(8) to force that to be appropriate for
the timestamp.

Or... (I haven't checked thoroughly for this from point of view of how it is used
in the drivers) use the same buffer for tx and rx. That is supposed to be safe for
SPI drivers though wonderfully there is a ? after the statement of that in
include/linux/spi.h. I think that is just pointing out that microwire doesn't
support duplex rather than saying it's invalid in general...



> };
>
> static inline int ad_sigma_delta_set_channel(struct ad_sigma_delta *sd,