Re: BananaPi M2 support

[Chen-Yu Tsai]

Hi,

On Wed, Nov 18, 2020 at 1:06 AM Sergey Suloev <ssuloev@xxxxxxxxxxxxx> wrote:
>
> Hi, ChenYu,
>
> I have tried to build and run linux-next  by tag  "next-20201117".
> Now the boot log looks different but the kernel still hangs. See
> https://pastebin.com/gFk7XuBc

Due to the new asynchronous probing of mmc controllers, the mmcblock
device numbers likely have changed, as seen here:

[ 1.652275] mmc1: new high speed SDHC card at address 0001
[ 1.652568] hub 1-1:1.0: USB hub found
[ 1.658587] mmcblk1: mmc1:0001 EB1QT 29.8 GiB
[ 1.661777] hub 1-1:1.0: 4 ports detected
[ 1.670263] mmcblk1: p1

You should change your root device specification to use PARTUUID,
instead of hardcoding the index.


Regards
ChenYu

> Thank you,
> Sergey
>
>
> On 17.11.2020 11:06, Chen-Yu Tsai wrote:
> > Hi,
> >
> > Please try linux-next. There were some regulator fixes that got merged recently.
> > One of them fixes an infinite recursion when resolving regulator supplies.
> >
> > ChenYu
> >
> > On Tue, Nov 17, 2020 at 1:12 AM Sergey Suloev <ssuloev@xxxxxxxxxxxxx> wrote:
> >> Hi, Maxime,
> >>
> >> it just hangs on that last lines and nothing happens anymore, see 5.18 log.
> >>
> >>
> >> On 16.11.2020 18:52, Maxime Ripard wrote:
> >>> Hi,
> >>>
> >>> On Sat, Nov 14, 2020 at 08:20:54PM +0300, Sergey Suloev wrote:
> >>>> Hi,
> >>>>
> >>>> I noticed that BananaPi M2 (A31 SoC) does not boot anymore on modern
> >>>> kernels. The problem arises somewhere between 5.7.19 - 5.8.18. I have saved
> >>>> boot logs for both versions https://pastebin.com/DTRZi8R7  and
> >>>> https://pastebin.com/PS2hq07A. Logs have been taken on clean/non-patched
> >>>> kernel with default config, u-boot v2020.10.
> >>>>
> >>>> The kernel versions 5.7.x and below work well (I tried 5.5.19 and 5.6.19).
> >>>> The versions 5.8.18 and above all fail (5.9 and 5.10).
> >>>>
> >>>> Could you look at the problem or provide an advice about further
> >>>> investigation, please ?
> >>> I'm not quite sure what the issue is exactly? How does it fail to boot?
> >>>
> >>> Maxime
> >>
> >> Thank you,
> >> Sergey
> >>
>