Re: [PATCH v1] arm64: tegra: jetson-tx1: Fix USB_VBUS_EN0 regulator

[JC Kuo]

On 11/18/20 7:24 PM, Jon Hunter wrote:
> 
> On 18/11/2020 03:46, JC Kuo wrote:
>> USB_VBUS_EN0 regulator (regulator@11) is being overwritten by vdd-cam-1v2
>> regulator. This commit rearrange USB_VBUS_EN0 to be regulator@14.
>>
>> Signed-off-by: JC Kuo <jckuo@xxxxxxxxxx>
>> ---
>>  .../arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 20 +++++++++----------
>>  1 file changed, 10 insertions(+), 10 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
>> index e18e1a9a3011..a9caaf7c0d67 100644
>> --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
>> +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
>> @@ -1663,16 +1663,6 @@ vdd_usb_vbus: regulator@9 {
>>  		vin-supply = <&vdd_5v0_sys>;
>>  	};
>>  
>> -	vdd_usb_vbus_otg: regulator@11 {
>> -		compatible = "regulator-fixed";
>> -		regulator-name = "USB_VBUS_EN0";
>> -		regulator-min-microvolt = <5000000>;
>> -		regulator-max-microvolt = <5000000>;
>> -		gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>;
>> -		enable-active-high;
>> -		vin-supply = <&vdd_5v0_sys>;
>> -	};
>> -
>>  	vdd_hdmi: regulator@10 {
>>  		compatible = "regulator-fixed";
>>  		regulator-name = "VDD_HDMI_5V0";
>> @@ -1712,4 +1702,14 @@ vdd_cam_1v8: regulator@13 {
>>  		enable-active-high;
>>  		vin-supply = <&vdd_3v3_sys>;
>>  	};
>> +
>> +	vdd_usb_vbus_otg: regulator@14 {
>> +		compatible = "regulator-fixed";
>> +		regulator-name = "USB_VBUS_EN0";
>> +		regulator-min-microvolt = <5000000>;
>> +		regulator-max-microvolt = <5000000>;
>> +		gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>;
>> +		enable-active-high;
>> +		vin-supply = <&vdd_5v0_sys>;
>> +	};
>>  };
>>
> 
> Thanks for catching this! We should add the 'Fixes:' tag.
Thanks for review. I will submit v2 and add 'Fixes:' tag.
> 
> By the way, I assume that VBUS is currently broken for the OTG port.
> Without this change is that USB port completely broken? I am wondering
> if we need to CC stable@xxxxxxxxxxxxxxx on this.
You are correct. Host mode at the OTG port is currently broken because VBUS is
not supplied to the OTG port. I will CC stable@xxxxxxxxxxxxxxx when send v2.
> 
> Reviewed-by: Jon Hunter <jonathanh@xxxxxxxxxx>
> 
> Cheers
> Jon
>