[PATCH v5 12/16] phy: tegra: xusb: Tegra210 host mode VBUS control

From: JC Kuo
Date: Thu Nov 19 2020 - 03:55:30 EST


To support XUSB host controller ELPG, this commit moves VBUS control
.phy_power_on()/.phy_power_off() to .phy_init()/.phy_exit().
When XUSB host controller enters ELPG, host driver invokes
.phy_power_off(), VBUS should remain ON so that USB devices will not
disconnect. VBUS can be turned OFF when host driver invokes
.phy_exit() which indicates disabling a USB port.

Signed-off-by: JC Kuo <jckuo@xxxxxxxxxx>
Acked-by: Thierry Reding <treding@xxxxxxxxxx>
---
v5:
no change
v4:
no change
v3:
new, was a part of "phy: tegra: xusb: Add wake/sleepwalk for Tegra210"

drivers/phy/tegra/xusb-tegra210.c | 52 ++++++++++++++++++++++++-------
1 file changed, 40 insertions(+), 12 deletions(-)

diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c
index 8af73ba78ad7..9d39f812fb43 100644
--- a/drivers/phy/tegra/xusb-tegra210.c
+++ b/drivers/phy/tegra/xusb-tegra210.c
@@ -1819,8 +1819,25 @@ static int tegra210_usb2_phy_init(struct phy *phy)
{
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+ unsigned int index = lane->index;
+ struct tegra_xusb_usb2_port *port;
+ int err;
u32 value;

+ port = tegra_xusb_find_usb2_port(padctl, index);
+ if (!port) {
+ dev_err(&phy->dev, "no port found for USB2 lane %u\n", index);
+ return -ENODEV;
+ }
+
+ if (port->supply && port->mode == USB_DR_MODE_HOST) {
+ err = regulator_enable(port->supply);
+ if (err)
+ return err;
+ }
+
+ mutex_lock(&padctl->lock);
+
value = padctl_readl(padctl, XUSB_PADCTL_USB2_PAD_MUX);
value &= ~(XUSB_PADCTL_USB2_PAD_MUX_USB2_BIAS_PAD_MASK <<
XUSB_PADCTL_USB2_PAD_MUX_USB2_BIAS_PAD_SHIFT);
@@ -1828,11 +1845,30 @@ static int tegra210_usb2_phy_init(struct phy *phy)
XUSB_PADCTL_USB2_PAD_MUX_USB2_BIAS_PAD_SHIFT;
padctl_writel(padctl, value, XUSB_PADCTL_USB2_PAD_MUX);

+ mutex_unlock(&padctl->lock);
+
return 0;
}

static int tegra210_usb2_phy_exit(struct phy *phy)
{
+ struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+ struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+ struct tegra_xusb_usb2_port *port;
+ int err;
+
+ port = tegra_xusb_find_usb2_port(padctl, lane->index);
+ if (!port) {
+ dev_err(&phy->dev, "no port found for USB2 lane %u\n", lane->index);
+ return -ENODEV;
+ }
+
+ if (port->supply && port->mode == USB_DR_MODE_HOST) {
+ err = regulator_disable(port->supply);
+ if (err)
+ return err;
+ }
+
return 0;
}

@@ -1953,6 +1989,8 @@ static int tegra210_usb2_phy_power_on(struct phy *phy)

priv = to_tegra210_xusb_padctl(padctl);

+ mutex_lock(&padctl->lock);
+
if (port->usb3_port_fake != -1) {
value = padctl_readl(padctl, XUSB_PADCTL_SS_PORT_MAP);
value &= ~XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP_MASK(
@@ -2046,14 +2084,6 @@ static int tegra210_usb2_phy_power_on(struct phy *phy)
padctl_writel(padctl, value,
XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(index));

- if (port->supply && port->mode == USB_DR_MODE_HOST) {
- err = regulator_enable(port->supply);
- if (err)
- return err;
- }
-
- mutex_lock(&padctl->lock);
-
if (pad->enable > 0) {
pad->enable++;
mutex_unlock(&padctl->lock);
@@ -2062,7 +2092,7 @@ static int tegra210_usb2_phy_power_on(struct phy *phy)

err = clk_prepare_enable(pad->clk);
if (err)
- goto disable_regulator;
+ goto out;

value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
value &= ~((XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_MASK <<
@@ -2094,8 +2124,7 @@ static int tegra210_usb2_phy_power_on(struct phy *phy)

return 0;

-disable_regulator:
- regulator_disable(port->supply);
+out:
mutex_unlock(&padctl->lock);
return err;
}
@@ -2154,7 +2183,6 @@ static int tegra210_usb2_phy_power_off(struct phy *phy)
padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);

out:
- regulator_disable(port->supply);
mutex_unlock(&padctl->lock);
return 0;
}
--
2.25.1