[PATCH v2 1/4] iio: adc: ad7887: convert dual-channel mode to DT/ACPI

From: Alexandru Ardelean
Date: Thu Nov 19 2020 - 05:03:03 EST


This change converts the configuration of the dual-channel mode from the
old platform-data, to the device_property_present() function, which
supports both device-tree and ACPI configuration setups.

With this change the old platform_data include of the driver can be
removed.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
---

I'm wondering if this changeset is what was in mind here:
https://lore.kernel.org/linux-iio/CA+U=DsqF5tu8Be9KXeyCWD2uHvV688Nc3n=z_Xi2J6H6DFJPRQ@xxxxxxxxxxxxxx/T/#mbe72e4da3acea3899d0d35402ea81e52a9bc34e6
This driver could have been simplified/reduced a whole lot more, but I'm
not sure about it. It's a bit of patch-noise, and later

Changelog v1 -> v2:
* dropped patch 'iio: adc: ad7887: convert driver to full DT probing'
not adding the device_get_match_data() logic anymore
* added patch 'iio: adc: ad7887: remove matching code from driver'
hooking the chip info directly to AD7887
* added patch 'iio: adc: ad7887: add OF match table'
this just adds an OF table for DT and ACPI

drivers/iio/adc/ad7887.c | 10 +++++-----
include/linux/platform_data/ad7887.h | 21 ---------------------
2 files changed, 5 insertions(+), 26 deletions(-)
delete mode 100644 include/linux/platform_data/ad7887.h

diff --git a/drivers/iio/adc/ad7887.c b/drivers/iio/adc/ad7887.c
index 4f6f0e0e03ee..06f684c053a0 100644
--- a/drivers/iio/adc/ad7887.c
+++ b/drivers/iio/adc/ad7887.c
@@ -23,8 +23,6 @@
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/triggered_buffer.h>

-#include <linux/platform_data/ad7887.h>
-
#define AD7887_REF_DIS BIT(5) /* on-chip reference disable */
#define AD7887_DUAL BIT(4) /* dual-channel mode */
#define AD7887_CH_AIN1 BIT(3) /* convert on channel 1, DUAL=1 */
@@ -241,9 +239,9 @@ static void ad7887_reg_disable(void *data)

static int ad7887_probe(struct spi_device *spi)
{
- struct ad7887_platform_data *pdata = spi->dev.platform_data;
struct ad7887_state *st;
struct iio_dev *indio_dev;
+ bool dual_mode;
uint8_t mode;
int ret;

@@ -286,7 +284,9 @@ static int ad7887_probe(struct spi_device *spi)
mode = AD7887_PM_MODE4;
if (!st->reg)
mode |= AD7887_REF_DIS;
- if (pdata && pdata->en_dual)
+
+ dual_mode = device_property_present(&spi->dev, "adi,dual-channel-mode");
+ if (dual_mode)
mode |= AD7887_DUAL;

st->tx_cmd_buf[0] = AD7887_CH_AIN0 | mode;
@@ -298,7 +298,7 @@ static int ad7887_probe(struct spi_device *spi)
spi_message_init(&st->msg[AD7887_CH0]);
spi_message_add_tail(&st->xfer[0], &st->msg[AD7887_CH0]);

- if (pdata && pdata->en_dual) {
+ if (dual_mode) {
st->tx_cmd_buf[2] = AD7887_CH_AIN1 | mode;

st->xfer[1].rx_buf = &st->data[0];
diff --git a/include/linux/platform_data/ad7887.h b/include/linux/platform_data/ad7887.h
deleted file mode 100644
index 9b4dca6ae70b..000000000000
--- a/include/linux/platform_data/ad7887.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * AD7887 SPI ADC driver
- *
- * Copyright 2010 Analog Devices Inc.
- */
-#ifndef IIO_ADC_AD7887_H_
-#define IIO_ADC_AD7887_H_
-
-/**
- * struct ad7887_platform_data - AD7887 ADC driver platform data
- * @en_dual: Whether to use dual channel mode. If set to true AIN1 becomes the
- * second input channel, and Vref is internally connected to Vdd. If set to
- * false the device is used in single channel mode and AIN1/Vref is used as
- * VREF input.
- */
-struct ad7887_platform_data {
- bool en_dual;
-};
-
-#endif /* IIO_ADC_AD7887_H_ */
--
2.17.1