[PATCH 4.9 10/16] i2c: imx: Fix external abort on interrupt in exit paths

From: Greg Kroah-Hartman
Date: Fri Nov 20 2020 - 06:04:09 EST


From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>

commit e50e4f0b85be308a01b830c5fbdffc657e1a6dd0 upstream

If interrupt comes late, during probe error path or device remove (could
be triggered with CONFIG_DEBUG_SHIRQ), the interrupt handler
i2c_imx_isr() will access registers with the clock being disabled. This
leads to external abort on non-linefetch on Toradex Colibri VF50 module
(with Vybrid VF5xx):

Unhandled fault: external abort on non-linefetch (0x1008) at 0x8882d003
Internal error: : 1008 [#1] ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 5.7.0 #607
Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
(i2c_imx_isr) from [<8017009c>] (free_irq+0x25c/0x3b0)
(free_irq) from [<805844ec>] (release_nodes+0x178/0x284)
(release_nodes) from [<80580030>] (really_probe+0x10c/0x348)
(really_probe) from [<80580380>] (driver_probe_device+0x60/0x170)
(driver_probe_device) from [<80580630>] (device_driver_attach+0x58/0x60)
(device_driver_attach) from [<805806bc>] (__driver_attach+0x84/0xc0)
(__driver_attach) from [<8057e228>] (bus_for_each_dev+0x68/0xb4)
(bus_for_each_dev) from [<8057f3ec>] (bus_add_driver+0x144/0x1ec)
(bus_add_driver) from [<80581320>] (driver_register+0x78/0x110)
(driver_register) from [<8010213c>] (do_one_initcall+0xa8/0x2f4)
(do_one_initcall) from [<80c0100c>] (kernel_init_freeable+0x178/0x1dc)
(kernel_init_freeable) from [<80807048>] (kernel_init+0x8/0x110)
(kernel_init) from [<80100114>] (ret_from_fork+0x14/0x20)

Additionally, the i2c_imx_isr() could wake up the wait queue
(imx_i2c_struct->queue) before its initialization happens.

The resource-managed framework should not be used for interrupt handling,
because the resource will be released too late - after disabling clocks.
The interrupt handler is not prepared for such case.

Fixes: 1c4b6c3bcf30 ("i2c: imx: implement bus recovery")
Cc: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
Acked-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
Signed-off-by: Wolfram Sang <wsa@xxxxxxxxxx>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-imx.c | 24 +++++++++++++-----------
1 file changed, 13 insertions(+), 11 deletions(-)

--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -1111,14 +1111,6 @@ static int i2c_imx_probe(struct platform
return ret;
}

- /* Request IRQ */
- ret = devm_request_irq(&pdev->dev, irq, i2c_imx_isr, 0,
- pdev->name, i2c_imx);
- if (ret) {
- dev_err(&pdev->dev, "can't claim irq %d\n", irq);
- goto clk_disable;
- }
-
/* Init queue */
init_waitqueue_head(&i2c_imx->queue);

@@ -1137,6 +1129,14 @@ static int i2c_imx_probe(struct platform
if (ret < 0)
goto rpm_disable;

+ /* Request IRQ */
+ ret = request_threaded_irq(irq, i2c_imx_isr, NULL, IRQF_SHARED,
+ pdev->name, i2c_imx);
+ if (ret) {
+ dev_err(&pdev->dev, "can't claim irq %d\n", irq);
+ goto rpm_disable;
+ }
+
/* Set up clock divider */
i2c_imx->bitrate = IMX_I2C_BIT_RATE;
ret = of_property_read_u32(pdev->dev.of_node,
@@ -1179,13 +1179,12 @@ static int i2c_imx_probe(struct platform

clk_notifier_unregister:
clk_notifier_unregister(i2c_imx->clk, &i2c_imx->clk_change_nb);
+ free_irq(irq, i2c_imx);
rpm_disable:
pm_runtime_put_noidle(&pdev->dev);
pm_runtime_disable(&pdev->dev);
pm_runtime_set_suspended(&pdev->dev);
pm_runtime_dont_use_autosuspend(&pdev->dev);
-
-clk_disable:
clk_disable_unprepare(i2c_imx->clk);
return ret;
}
@@ -1193,7 +1192,7 @@ clk_disable:
static int i2c_imx_remove(struct platform_device *pdev)
{
struct imx_i2c_struct *i2c_imx = platform_get_drvdata(pdev);
- int ret;
+ int irq, ret;

ret = pm_runtime_get_sync(&pdev->dev);
if (ret < 0)
@@ -1213,6 +1212,9 @@ static int i2c_imx_remove(struct platfor
imx_i2c_write_reg(0, i2c_imx, IMX_I2C_I2SR);

clk_notifier_unregister(i2c_imx->clk, &i2c_imx->clk_change_nb);
+ irq = platform_get_irq(pdev, 0);
+ if (irq >= 0)
+ free_irq(irq, i2c_imx);
clk_disable_unprepare(i2c_imx->clk);

pm_runtime_put_noidle(&pdev->dev);