[PATCH 5.4 054/158] ARM: dts: sun7i: bananapi-m1-plus: Enable RGMII RX/TX delay on Ethernet PHY

[Greg Kroah-Hartman]

From: Chen-Yu Tsai <wens@xxxxxxxx>

[ Upstream commit f94f78bd93f567c022f594589dbeecdf59931365 ]

The Ethernet PHY on the Bananapi M1+ has the RX and TX delays
enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins.

Fix the phy-mode description to correct reflect this so that the
implementation doesn't reconfigure the delays incorrectly. This
happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e
rx/tx delay config").

Fixes: 04c85ecad32a ("ARM: dts: sun7i: Add dts file for Bananapi M1 Plus board")
Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
Acked-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
Link: https://lore.kernel.org/r/20201024162515.30032-4-wens@xxxxxxxxxx
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
index 32d5d45a35c03..8945dbb114a2a 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
@@ -130,7 +130,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
 };
-- 
2.27.0