[PATCH][next] scsi: pm8001: remove space in a debug message

[Colin King]

From: Colin Ian King <colin.king@xxxxxxxxxxxxx>

There are two words that need separating with a space in a 
pm8001_dbg message. Fix it.

Signed-off-by: Colin Ian King <colin.king@xxxxxxxxxxxxx>
---
 drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 08d6cc9b50db..c8d4d87c5473 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -1031,7 +1031,7 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
 	regVal = pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK);
 	pm8001_cw32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK, regVal3);
 	pm8001_dbg(pm8001_ha, INIT,
-		   "GSM 0x700048 - Write Data Parity Check Enableis set to = 0x%x\n",
+		   "GSM 0x700048 - Write Data Parity Check Enable is set to = 0x%x\n",
 		   pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK));
 
 	/* step 13: bring the IOP and AAP1 out of reset */
-- 
2.29.2