Re: [PATCH] mmc: sdhci-pci-gli: Disable slow mode in HS400 mode for GL9763E

[Ulf Hansson]

On Wed, 25 Nov 2020 at 10:59, Ben Chuang <benchuanggli@xxxxxxxxx> wrote:
>
> From: Ben Chuang <ben.chuang@xxxxxxxxxxxxxxxxxxx>
>
> The GL9763E uses 150Mhz (slow mode) by default in HS400 mode. In order
> to make HS400 mode run at 200Mhz, the slow mode needs to be turned off.
>
> Fixes: 1ae1d2d6e555 ("mmc: sdhci-pci-gli: Add Genesys Logic GL9763E support")

Why a fixes tag? This patch looks like an improvement and not a fix, right?

Kind regards
Uffe

> Signed-off-by: Ben Chuang <ben.chuang@xxxxxxxxxxxxxxxxxxx>
> ---
>  drivers/mmc/host/sdhci-pci-gli.c | 7 +++++++
>  1 file changed, 7 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
> index 9887485a4134..d45d7e529150 100644
> --- a/drivers/mmc/host/sdhci-pci-gli.c
> +++ b/drivers/mmc/host/sdhci-pci-gli.c
> @@ -87,6 +87,9 @@
>  #define PCIE_GLI_9763E_SCR      0x8E0
>  #define   GLI_9763E_SCR_AXI_REQ           BIT(9)
>
> +#define PCIE_GLI_9763E_MMC_CTRL  0x960
> +#define   GLI_9763E_HS400_SLOW     BIT(3)
> +
>  #define SDHCI_GLI_9763E_CQE_BASE_ADDR   0x200
>  #define GLI_9763E_CQE_TRNS_MODE           (SDHCI_TRNS_MULTI | \
>                                     SDHCI_TRNS_BLK_CNT_EN | \
> @@ -764,6 +767,10 @@ static void gli_set_gl9763e(struct sdhci_pci_slot *slot)
>         value |= GLI_9763E_SCR_AXI_REQ;
>         pci_write_config_dword(pdev, PCIE_GLI_9763E_SCR, value);
>
> +       pci_read_config_dword(pdev, PCIE_GLI_9763E_MMC_CTRL, &value);
> +       value &= ~GLI_9763E_HS400_SLOW;
> +       pci_write_config_dword(pdev, PCIE_GLI_9763E_MMC_CTRL, value);
> +
>         pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
>         value &= ~GLI_9763E_VHS_REV;
>         value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_R);
> --
> 2.29.2
>