Re: [RFC PATCH 2/3] net: sparx5: Add Sparx5 switchdev driver

[Andrew Lunn]

> +#define SPX5_RD_(sparx5, id, tinst, tcnt,			\
> +		 gbase, ginst, gcnt, gwidth,			\
> +		 raddr, rinst, rcnt, rwidth)			\
> +	readl(spx5_addr((sparx5)->regs, id, tinst, tcnt,	\
> +			gbase, ginst, gcnt, gwidth,             \
> +			raddr, rinst, rcnt, rwidth))
> +
> +#define SPX5_INST_RD_(iomem, id, tinst, tcnt,			\
> +		      gbase, ginst, gcnt, gwidth,		\
> +		      raddr, rinst, rcnt, rwidth)		\
> +	readl(spx5_inst_addr(iomem,				\
> +			     gbase, ginst, gcnt, gwidth,	\
> +			     raddr, rinst, rcnt, rwidth))
> +
> +#define SPX5_WR_(val, sparx5, id, tinst, tcnt,			\
> +		 gbase, ginst, gcnt, gwidth,			\
> +		 raddr, rinst, rcnt, rwidth)			\
> +	writel(val, spx5_addr((sparx5)->regs, id, tinst, tcnt,	\
> +			      gbase, ginst, gcnt, gwidth,	\
> +			      raddr, rinst, rcnt, rwidth))
> +
> +#define SPX5_INST_WR_(val, iomem, id, tinst, tcnt,		\
> +		      gbase, ginst, gcnt, gwidth,		\
> +		      raddr, rinst, rcnt, rwidth)		\
> +	writel(val, spx5_inst_addr(iomem,			\
> +				   gbase, ginst, gcnt, gwidth,	\
> +				   raddr, rinst, rcnt, rwidth))
> +
> +#define SPX5_RMW_(val, mask, sparx5, id, tinst, tcnt,			\
> +		  gbase, ginst, gcnt, gwidth,				\
> +		  raddr, rinst, rcnt, rwidth)				\
> +	do {								\
> +		u32 _v_;						\
> +		u32 _m_ = mask;						\
> +		void __iomem *addr =					\
> +			spx5_addr((sparx5)->regs, id, tinst, tcnt,	\
> +				  gbase, ginst, gcnt, gwidth,		\
> +				  raddr, rinst, rcnt, rwidth);		\
> +		_v_ = readl(addr);					\
> +		_v_ = ((_v_ & ~(_m_)) | ((val) & (_m_)));		\
> +		writel(_v_, addr);					\
> +	} while (0)
> +
> +#define SPX5_INST_RMW_(val, mask, iomem, id, tinst, tcnt,		\
> +		       gbase, ginst, gcnt, gwidth,			\
> +		       raddr, rinst, rcnt, rwidth)			\
> +	do {								\
> +		u32 _v_;						\
> +		u32 _m_ = mask;						\
> +		void __iomem *addr =					\
> +			spx5_inst_addr(iomem,				\
> +				       gbase, ginst, gcnt, gwidth,	\
> +				       raddr, rinst, rcnt, rwidth);	\
> +		_v_ = readl(addr);					\
> +		_v_ = ((_v_ & ~(_m_)) | ((val) & (_m_)));		\
> +		writel(_v_, addr);					\
> +	} while (0)
> +
> +#define SPX5_REG_RD_(regaddr)			\
> +	readl(regaddr)
> +
> +#define SPX5_REG_WR_(val, regaddr)		\
> +	writel(val, regaddr)
> +
> +#define SPX5_REG_RMW_(val, mask, regaddr)		    \
> +	do {						    \
> +		u32 _v_;                                    \
> +		u32 _m_ = mask;				    \
> +		void __iomem *_r_ = regaddr;		    \
> +		_v_ = readl(_r_);			    \
> +		_v_ = ((_v_ & ~(_m_)) | ((val) & (_m_)));   \
> +		writel(_v_, _r_);			    \
> +	} while (0)
> +
> +#define SPX5_REG_GET_(sparx5, id, tinst, tcnt,			\
> +		      gbase, ginst, gcnt, gwidth,		\
> +		      raddr, rinst, rcnt, rwidth)		\
> +	spx5_addr((sparx5)->regs, id, tinst, tcnt,		\
> +		  gbase, ginst, gcnt, gwidth,			\
> +		  raddr, rinst, rcnt, rwidth)
> +
> +#define SPX5_RD(...)  SPX5_RD_(__VA_ARGS__)
> +#define SPX5_WR(...)  SPX5_WR_(__VA_ARGS__)
> +#define SPX5_RMW(...) SPX5_RMW_(__VA_ARGS__)
> +#define SPX5_INST_RD(...) SPX5_INST_RD_(__VA_ARGS__)
> +#define SPX5_INST_WR(...) SPX5_INST_WR_(__VA_ARGS__)
> +#define SPX5_INST_RMW(...) SPX5_INST_RMW_(__VA_ARGS__)
> +#define SPX5_INST_GET(sparx5, id, tinst) ((sparx5)->regs[(id) + (tinst)])
> +#define SPX5_REG_RMW(...) SPX5_REG_RMW_(__VA_ARGS__)
> +#define SPX5_REG_WR(...) SPX5_REG_WR_(__VA_ARGS__)
> +#define SPX5_REG_RD(...) SPX5_REG_RD_(__VA_ARGS__)
> +#define SPX5_REG_GET(...) SPX5_REG_GET_(__VA_ARGS__)

I don't see any reason for macro magic here. If this just left over
from HAL code? Please turn this all into functions.

     Andrew