Re: [PATCH 2/3] ARM: dts: imx28: add pinmux for USB1 overcurrent on pwm2

[Shawn Guo]

On Wed, Nov 25, 2020 at 05:18:14PM +0100, Lukasz Majewski wrote:
> From: Mans Rullgard <mans@xxxxxxxxx>
> 
> Add pinmux setting for USB1 overcurrent on pwm2 pad.
> 
> Signed-off-by: Mans Rullgard <mans@xxxxxxxxx>

Lukasz,

You need to add your SoB.

Shawn

> ---
>  arch/arm/boot/dts/imx28.dtsi | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
> index 6e7531b64bf7..6d24546f0abe 100644
> --- a/arch/arm/boot/dts/imx28.dtsi
> +++ b/arch/arm/boot/dts/imx28.dtsi
> @@ -948,6 +948,16 @@
>  					fsl,pull-up = <MXS_PULL_DISABLE>;
>  				};
>  
> +				usb1_pins_b: usb1@1 {
> +					reg = <1>;
> +					fsl,pinmux-ids = <
> +						MX28_PAD_PWM2__USB1_OVERCURRENT
> +					>;
> +					fsl,drive-strength = <MXS_DRIVE_12mA>;
> +					fsl,voltage = <MXS_VOLTAGE_HIGH>;
> +					fsl,pull-up = <MXS_PULL_DISABLE>;
> +				};
> +
>  				usb0_id_pins_a: usb0id@0 {
>  					reg = <0>;
>  					fsl,pinmux-ids = <
> -- 
> 2.20.1
>