[PATCH 3/6] arm64: dts: qcom: sm8250: add lpass lpi pin controller node

[Srinivas Kandagatla]

Add LPASS LPI pinctrl node required for Audio functionality on RB5.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 95 ++++++++++++++++++++++++++++
 1 file changed, 95 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index ec5b53b8f656..4e1309b6571e 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2607,6 +2607,101 @@
 			clock-names = "core", "audio", "bus";
 		};
 
+		lpass_tlmm: pinctrl@33c0000{
+			compatible = "qcom,sm8250-lpass-lpi-pinctrl";
+			reg = <0 0x33c0000 0x0 0x20000>,
+				 <0 0x3550000 0x0 0x10000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&lpass_tlmm 0 0 14>;
+
+			clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "core", "audio";
+
+			wsa_swr_clk_pin {
+				wsa_swr_clk_sleep: wsa_swr_clk_sleep {
+					mux {
+						pins = "gpio10";
+						function = "wsa_swr_clk";
+						drive-strength = <2>;
+						input-enable;
+						bias-pull-down;
+					};
+				};
+
+				wsa_swr_clk_active: wsa_swr_clk_active {
+					mux {
+						pins = "gpio10";
+						function = "wsa_swr_clk";
+						drive-strength = <2>;
+						slew-rate = <1>;
+						bias-disable;
+					};
+				};
+			};
+
+			wsa_swr_data_pin {
+				wsa_swr_data_sleep: wsa_swr_data_sleep {
+					mux {
+						pins = "gpio11";
+						function = "wsa_swr_data";
+						drive-strength = <2>;
+						input-enable;
+						bias-pull-down;
+					};
+				};
+
+				wsa_swr_data_active: wsa_swr_data_active {
+					mux {
+						pins = "gpio11";
+						function = "wsa_swr_data";
+						drive-strength = <2>;
+						slew-rate = <1>;
+						bias-bus-hold;
+					};
+				};
+			};
+
+	                cdc_dmic01_data_active: dmic01_data_active {
+	                        mux {
+	                                pins = "gpio7";
+					function = "dmic1_data";
+	                                drive-strength = <8>;
+	                                input-enable;
+	                        };
+	                };
+
+	                cdc_dmic01_data_sleep: dmic01_data_sleep {
+	                        mux {
+	                                pins = "gpio7";
+					function = "dmic1_data";
+	                                drive-strength = <2>;
+	                                pull-down;
+	                                input-enable;
+	                        };
+	                };
+
+	                cdc_dmic01_clk_active: dmic01_clk_active {
+	                        mux {
+	                                pins = "gpio6";
+					function = "dmic1_clk";
+	                                drive-strength = <8>;
+	                                output-high;
+	                        };
+	                };
+
+	                cdc_dmic01_clk_sleep: dmic01_clk_sleep {
+	                        mux {
+	                                pins = "gpio6";
+					function = "dmic1_clk";
+	                                drive-strength = <2>;
+	                                bias-disable;
+	                                output-low;
+	                        };
+	                };
+		};
+
 		adsp: remoteproc@17300000 {
 			compatible = "qcom,sm8250-adsp-pas";
 			reg = <0 0x17300000 0 0x100>;
-- 
2.21.0