Re: [PATCH] PCI: Add pci reset quirk for Huawei Intelligent NIC virtual function

[Bjorn Helgaas]

On Wed, Dec 02, 2020 at 05:18:12PM +0800, Chiqijun wrote:
> On 2020/11/30 23:46, Alex Williamson wrote:
> > On Sat, 28 Nov 2020 17:29:19 -0600
> > Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote:
> > > On Sat, Nov 28, 2020 at 02:18:25PM +0800, Chiqijun wrote:
> > > > When multiple VFs do FLR at the same time, the firmware is
> > > > processed serially, resulting in some VF FLRs being delayed more
> > > > than 100ms, when the virtual machine restarts and the device
> > > > driver is loaded, the firmware is doing the corresponding VF
> > > > FLR, causing the driver to fail to load.
> > > > 
> > > > To solve this problem, add host and firmware status synchronization
> > > > during FLR.
> > > 
> > > Is this because the Huawei Intelligent NIC isn't following the spec,
> > > or is it because Linux isn't correctly waiting for the FLR to
> > > complete?
> > 
> > Seems like a spec compliance issue, I don't recall anything in the spec
> > about coordinating FLR between VFs.
> 
> The spec stipulates that the FLR time of a single VF does not exceed 100ms,
> but when multiple VMs are reset concurrently in Linux, there will be
> multiple VF parallel FLRs, VF of Huawei Intelligent NIC
>  FLR will exceed 100ms in this case.

Can you somehow just serialize Huawei Intelligent NIC FLR and
otherwise use the normal FLR path instead of the iomap, PCI_COMMAND
fiddling, and huge timeout below?

> > > If this is a Huawei Intelligent NIC defect, is there documentation
> > > somewhere (errata) that you can reference?  Will it be fixed in future
> > > designs, so we don't have to add future Device IDs to the quirk?
> > > 
> > > > Signed-off-by: Chiqijun <chiqijun@xxxxxxxxxx>
> > > > ---
> > > >   drivers/pci/quirks.c | 67 ++++++++++++++++++++++++++++++++++++++++++++
> > > >   1 file changed, 67 insertions(+)
> > > > 
> > > > diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> > > > index f70692ac79c5..bd6236ea9064 100644
> > > > --- a/drivers/pci/quirks.c
> > > > +++ b/drivers/pci/quirks.c
> > > > @@ -3912,6 +3912,71 @@ static int delay_250ms_after_flr(struct pci_dev *dev, int probe)
> > > >   	return 0;
> > > >   }
> > > > +#define PCI_DEVICE_ID_HINIC_VF  0x375E
> > > > +#define HINIC_VF_FLR_TYPE       0x1000
> > > > +#define HINIC_VF_OP             0xE80
> > > > +#define HINIC_OPERATION_TIMEOUT 15000
> > > > +
> > > > +/* Device-specific reset method for Huawei Intelligent NIC virtual functions */
> > > > +static int reset_hinic_vf_dev(struct pci_dev *pdev, int probe)
> > > > +{
> > > > +	unsigned long timeout;
> > > > +	void __iomem *bar;
> > > > +	u16 old_command;
> > > > +	u32 val;
> > > > +
> > > > +	if (probe)
> > > > +		return 0;
> > > > +
> > > > +	bar = pci_iomap(pdev, 0, 0);
> > > > +	if (!bar)
> > > > +		return -ENOTTY;
> > > > +
> > > > +	pci_read_config_word(pdev, PCI_COMMAND, &old_command);
> > > > +
> > > > +	/*
> > > > +	 * FLR cap bit bit30, FLR ACK bit: bit18, to avoid big-endian conversion
> > > > +	 * the big-endian bit6, bit10 is directly operated here
> > > > +	 */
> > > > +	val = readl(bar + HINIC_VF_FLR_TYPE);
> > > > +	if (!(val & (1UL << 6))) {
> > > > +		pci_iounmap(pdev, bar);
> > > > +		return -ENOTTY;
> > > > +	}
> > 
> > 
> > I don't know exactly what this is testing, but it seems like a
> > feature/capability test that can fail, why is it not done as part of
> > the probe?  Can we define bit 6 with a macro?  Same for bit 10 in the
> > VF op register below.
> 
> The firmware of Huawei Intelligent NIC does not support this feature in the
> old version. here is the reading ability to determine whether the firmware
> supports it.
> In the next patch, I will add a comment here and replace bit 6 and bit 10
> with macro definitions.
> 
> > 
> > > > +
> > > > +	val = readl(bar + HINIC_VF_OP);
> > > > +	val = val | (1UL << 10);
> > > > +	writel(val, bar + HINIC_VF_OP);
> > > > +
> > > > +	/* Perform the actual device function reset */
> > > > +	pcie_flr(pdev);
> > > > +
> > > > +	pci_write_config_word(pdev, PCI_COMMAND,
> > > > +			      old_command | PCI_COMMAND_MEMORY);
> > > > +
> > > > +	/* Waiting for device reset complete */
> > > > +	timeout = jiffies + msecs_to_jiffies(HINIC_OPERATION_TIMEOUT);
> > 
> > Yikes, 15s timeout!
> 
> Huawei Intelligent NIC supports a maximum of 496 VFs, so the total timeout
> period is set to 15s, which will not reach the timeout time under normal
> circumstances.
> 
> > 
> > > > +	do {
> > > > +		val = readl(bar + HINIC_VF_OP);
> > > > +		if (!(val & (1UL << 10)))
> > > > +			goto reset_complete;
> > > > +		msleep(20);
> > > > +	} while (time_before(jiffies, timeout));
> > > > +
> > > > +	val = readl(bar + HINIC_VF_OP);
> > > > +	if (!(val & (1UL << 10)))
> > > > +		goto reset_complete;
> > > > +
> > > > +	pci_warn(pdev, "Reset dev timeout, flr ack reg: %x\n",
> > > > +		 be32_to_cpu(val));
> > > > +
> > > > +reset_complete:
> > > > +	pci_write_config_word(pdev, PCI_COMMAND, old_command);
> > > > +	pci_iounmap(pdev, bar);
> > > > +
> > > > +	return 0;
> > > > +}
> > > > +
> > > >   static const struct pci_dev_reset_methods pci_dev_reset_methods[] = {
> > > >   	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82599_SFP_VF,
> > > >   		 reset_intel_82599_sfp_virtfn },
> > > > @@ -3923,6 +3988,8 @@ static const struct pci_dev_reset_methods pci_dev_reset_methods[] = {
> > > >   	{ PCI_VENDOR_ID_INTEL, 0x0953, delay_250ms_after_flr },
> > > >   	{ PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID,
> > > >   		reset_chelsio_generic_dev },
> > > > +	{ PCI_VENDOR_ID_HUAWEI, PCI_DEVICE_ID_HINIC_VF,
> > > > +		reset_hinic_vf_dev },
> > > >   	{ 0 }
> > > >   };
> > > > -- 
> > > > 2.17.1
> > > 
> > 
> > .
> >