Re: [PATCH v2 2/3] usb: typec: tcpci: Add support to report vSafe0V

From: Heikki Krogerus
Date: Tue Dec 08 2020 - 04:28:01 EST


On Tue, Dec 01, 2020 at 08:08:39PM -0800, Badhri Jagan Sridharan wrote:
> This change adds vbus_vsafe0v which when set, makes TCPM
> query for VSAFE0V by assigning the tcpc.is_vbus_vsafe0v callback.
> Also enables ALERT.ExtendedStatus which is triggered when
> status of EXTENDED_STATUS.vSafe0V changes.
> EXTENDED_STATUS.vSafe0V is set when vbus is at vSafe0V and
> cleared otherwise.
>
> Signed-off-by: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>

Acked-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>

> ---
> Changes since v1:
> - Removed logic for checking TCPC_POWER_STATUS_MASK reg
> read in the irq handler. Sending that as a separate patch.
> ---
> drivers/usb/typec/tcpm/tcpci.c | 39 +++++++++++++++++++++++++++++-----
> drivers/usb/typec/tcpm/tcpci.h | 6 ++++++
> 2 files changed, 40 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c
> index 12d983a75510..f938d9876ce9 100644
> --- a/drivers/usb/typec/tcpm/tcpci.c
> +++ b/drivers/usb/typec/tcpm/tcpci.c
> @@ -402,6 +402,19 @@ static int tcpci_get_vbus(struct tcpc_dev *tcpc)
> return !!(reg & TCPC_POWER_STATUS_VBUS_PRES);
> }
>
> +static bool tcpci_is_vbus_vsafe0v(struct tcpc_dev *tcpc)
> +{
> + struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
> + unsigned int reg;
> + int ret;
> +
> + ret = regmap_read(tcpci->regmap, TCPC_EXTENDED_STATUS, &reg);
> + if (ret < 0)
> + return false;
> +
> + return !!(reg & TCPC_EXTENDED_STATUS_VSAFE0V);
> +}
> +
> static int tcpci_set_vbus(struct tcpc_dev *tcpc, bool source, bool sink)
> {
> struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
> @@ -554,12 +567,22 @@ static int tcpci_init(struct tcpc_dev *tcpc)
> TCPC_ALERT_RX_HARD_RST | TCPC_ALERT_CC_STATUS;
> if (tcpci->controls_vbus)
> reg |= TCPC_ALERT_POWER_STATUS;
> + /* Enable VSAFE0V status interrupt when detecting VSAFE0V is supported */
> + if (tcpci->data->vbus_vsafe0v) {
> + reg |= TCPC_ALERT_EXTENDED_STATUS;
> + ret = regmap_write(tcpci->regmap, TCPC_EXTENDED_STATUS_MASK,
> + TCPC_EXTENDED_STATUS_VSAFE0V);
> + if (ret < 0)
> + return ret;
> + }
> return tcpci_write16(tcpci, TCPC_ALERT_MASK, reg);
> }
>
> irqreturn_t tcpci_irq(struct tcpci *tcpci)
> {
> u16 status;
> + int ret;
> + unsigned int raw;
>
> tcpci_read16(tcpci, TCPC_ALERT, &status);
>
> @@ -575,15 +598,12 @@ irqreturn_t tcpci_irq(struct tcpci *tcpci)
> tcpm_cc_change(tcpci->port);
>
> if (status & TCPC_ALERT_POWER_STATUS) {
> - unsigned int reg;
> -
> - regmap_read(tcpci->regmap, TCPC_POWER_STATUS_MASK, &reg);
> -
> + regmap_read(tcpci->regmap, TCPC_POWER_STATUS_MASK, &raw);
> /*
> * If power status mask has been reset, then the TCPC
> * has reset.
> */
> - if (reg == 0xff)
> + if (raw == 0xff)
> tcpm_tcpc_reset(tcpci->port);
> else
> tcpm_vbus_change(tcpci->port);
> @@ -622,6 +642,12 @@ irqreturn_t tcpci_irq(struct tcpci *tcpci)
> tcpm_pd_receive(tcpci->port, &msg);
> }
>
> + if (status & TCPC_ALERT_EXTENDED_STATUS) {
> + ret = regmap_read(tcpci->regmap, TCPC_EXTENDED_STATUS, &raw);
> + if (!ret && (raw & TCPC_EXTENDED_STATUS_VSAFE0V))
> + tcpm_vbus_change(tcpci->port);
> + }
> +
> if (status & TCPC_ALERT_RX_HARD_RST)
> tcpm_pd_hard_reset(tcpci->port);
>
> @@ -699,6 +725,9 @@ struct tcpci *tcpci_register_port(struct device *dev, struct tcpci_data *data)
> tcpci_set_auto_vbus_discharge_threshold;
> }
>
> + if (tcpci->data->vbus_vsafe0v)
> + tcpci->tcpc.is_vbus_vsafe0v = tcpci_is_vbus_vsafe0v;
> +
> err = tcpci_parse_config(tcpci);
> if (err < 0)
> return ERR_PTR(err);
> diff --git a/drivers/usb/typec/tcpm/tcpci.h b/drivers/usb/typec/tcpm/tcpci.h
> index 3fe313655f0c..116a69c85e38 100644
> --- a/drivers/usb/typec/tcpm/tcpci.h
> +++ b/drivers/usb/typec/tcpm/tcpci.h
> @@ -49,6 +49,9 @@
> #define TCPC_TCPC_CTRL_ORIENTATION BIT(0)
> #define TCPC_TCPC_CTRL_BIST_TM BIT(1)
>
> +#define TCPC_EXTENDED_STATUS 0x20
> +#define TCPC_EXTENDED_STATUS_VSAFE0V BIT(0)
> +
> #define TCPC_ROLE_CTRL 0x1a
> #define TCPC_ROLE_CTRL_DRP BIT(6)
> #define TCPC_ROLE_CTRL_RP_VAL_SHIFT 4
> @@ -155,11 +158,14 @@ struct tcpci;
> * is sourcing vbus.
> * @auto_discharge_disconnect:
> * Optional; Enables TCPC to autonously discharge vbus on disconnect.
> + * @vbus_vsafe0v:
> + * optional; Set when TCPC can detect whether vbus is at VSAFE0V.
> */
> struct tcpci_data {
> struct regmap *regmap;
> unsigned char TX_BUF_BYTE_x_hidden:1;
> unsigned char auto_discharge_disconnect:1;
> + unsigned char vbus_vsafe0v:1;
>
> int (*init)(struct tcpci *tcpci, struct tcpci_data *data);
> int (*set_vconn)(struct tcpci *tcpci, struct tcpci_data *data,
> --
> 2.29.2.576.ga3fc446d84-goog

--
heikki