Re: [PATCH] Input: edt-ft5x06 - consolidate handling of number of electrodes

[Andy Shevchenko]

On Wed, Dec 09, 2020 at 03:09:10PM -0800, Dmitry Torokhov wrote:
> Instead of using special-casing retrieval of number of X/Y electrodes
> based on the firmware, let's select default values and mark registers as
> non-existent on firmwares that do not support this operation.
> 
> Also mark "report rate" register as non-existent for generic firmwares as
> having it set to 0 does not make sense.

Makes sense, FWIW,
Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>

> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
> ---
>  drivers/input/touchscreen/edt-ft5x06.c | 43 ++++++++++----------------
>  1 file changed, 17 insertions(+), 26 deletions(-)
> 
> diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
> index 6ff81d48da86..2eefbc2485bc 100644
> --- a/drivers/input/touchscreen/edt-ft5x06.c
> +++ b/drivers/input/touchscreen/edt-ft5x06.c
> @@ -69,6 +69,9 @@
>  #define EDT_RAW_DATA_RETRIES		100
>  #define EDT_RAW_DATA_DELAY		1000 /* usec */
>  
> +#define EDT_DEFAULT_NUM_X		1024
> +#define EDT_DEFAULT_NUM_Y		1024
> +
>  enum edt_pmode {
>  	EDT_PMODE_NOT_SUPPORTED,
>  	EDT_PMODE_HIBERNATE,
> @@ -977,8 +980,7 @@ static void edt_ft5x06_ts_get_defaults(struct device *dev,
>  	}
>  }
>  
> -static void
> -edt_ft5x06_ts_get_parameters(struct edt_ft5x06_ts_data *tsdata)
> +static void edt_ft5x06_ts_get_parameters(struct edt_ft5x06_ts_data *tsdata)
>  {
>  	struct edt_reg_addr *reg_addr = &tsdata->reg_addr;
>  
> @@ -997,21 +999,17 @@ edt_ft5x06_ts_get_parameters(struct edt_ft5x06_ts_data *tsdata)
>  	if (reg_addr->reg_report_rate != NO_REGISTER)
>  		tsdata->report_rate = edt_ft5x06_register_read(tsdata,
>  						reg_addr->reg_report_rate);
> -	if (tsdata->version == EDT_M06 ||
> -	    tsdata->version == EDT_M09 ||
> -	    tsdata->version == EDT_M12) {
> +	tsdata->num_x = EDT_DEFAULT_NUM_X;
> +	if (reg_addr->reg_num_x != NO_REGISTER)
>  		tsdata->num_x = edt_ft5x06_register_read(tsdata,
>  							 reg_addr->reg_num_x);
> +	tsdata->num_y = EDT_DEFAULT_NUM_Y;
> +	if (reg_addr->reg_num_y != NO_REGISTER)
>  		tsdata->num_y = edt_ft5x06_register_read(tsdata,
>  							 reg_addr->reg_num_y);
> -	} else {
> -		tsdata->num_x = -1;
> -		tsdata->num_y = -1;
> -	}
>  }
>  
> -static void
> -edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata)
> +static void edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata)
>  {
>  	struct edt_reg_addr *reg_addr = &tsdata->reg_addr;
>  
> @@ -1041,22 +1039,25 @@ edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata)
>  
>  	case EV_FT:
>  		reg_addr->reg_threshold = EV_REGISTER_THRESHOLD;
> +		reg_addr->reg_report_rate = NO_REGISTER;
>  		reg_addr->reg_gain = EV_REGISTER_GAIN;
>  		reg_addr->reg_offset = NO_REGISTER;
>  		reg_addr->reg_offset_x = EV_REGISTER_OFFSET_X;
>  		reg_addr->reg_offset_y = EV_REGISTER_OFFSET_Y;
>  		reg_addr->reg_num_x = NO_REGISTER;
>  		reg_addr->reg_num_y = NO_REGISTER;
> -		reg_addr->reg_report_rate = NO_REGISTER;
>  		break;
>  
>  	case GENERIC_FT:
>  		/* this is a guesswork */
>  		reg_addr->reg_threshold = M09_REGISTER_THRESHOLD;
> +		reg_addr->reg_report_rate = NO_REGISTER;
>  		reg_addr->reg_gain = M09_REGISTER_GAIN;
>  		reg_addr->reg_offset = M09_REGISTER_OFFSET;
>  		reg_addr->reg_offset_x = NO_REGISTER;
>  		reg_addr->reg_offset_y = NO_REGISTER;
> +		reg_addr->reg_num_x = NO_REGISTER;
> +		reg_addr->reg_num_y = NO_REGISTER;
>  		break;
>  	}
>  }
> @@ -1195,20 +1196,10 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
>  	input->id.bustype = BUS_I2C;
>  	input->dev.parent = &client->dev;
>  
> -	if (tsdata->version == EDT_M06 ||
> -	    tsdata->version == EDT_M09 ||
> -	    tsdata->version == EDT_M12) {
> -		input_set_abs_params(input, ABS_MT_POSITION_X,
> -				     0, tsdata->num_x * 64 - 1, 0, 0);
> -		input_set_abs_params(input, ABS_MT_POSITION_Y,
> -				     0, tsdata->num_y * 64 - 1, 0, 0);
> -	} else {
> -		/* Unknown maximum values. Specify via devicetree */
> -		input_set_abs_params(input, ABS_MT_POSITION_X,
> -				     0, 65535, 0, 0);
> -		input_set_abs_params(input, ABS_MT_POSITION_Y,
> -				     0, 65535, 0, 0);
> -	}
> +	input_set_abs_params(input, ABS_MT_POSITION_X,
> +			     0, tsdata->num_x * 64 - 1, 0, 0);
> +	input_set_abs_params(input, ABS_MT_POSITION_Y,
> +			     0, tsdata->num_y * 64 - 1, 0, 0);
>  
>  	touchscreen_parse_properties(input, true, &tsdata->prop);
>  
> -- 
> 2.29.2.576.ga3fc446d84-goog
> 
> 
> -- 
> Dmitry

-- 
With Best Regards,
Andy Shevchenko