[PATCH 1/1] ARM: dts: opos6ul: add ksz8081 phy properties

[Sébastien Szymanski]

Set clock mode and the LED mode in the device tree instead of relying on
the fixup in mach-imx6ul.

Signed-off-by: Sébastien Szymanski <sebastien.szymanski@xxxxxxxxxxxx>
---
 arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi b/arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi
index f2386dcb9ff2..dda4fa91b2f2 100644
--- a/arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi
@@ -40,6 +40,9 @@ ethphy1: ethernet-phy@1 {
 			reg = <1>;
 			interrupt-parent = <&gpio4>;
 			interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
 			status = "okay";
 		};
 	};
-- 
2.26.2