[PATCH v2 47/48] ARM: tegra: ventana: Support CPU voltage scaling and thermal throttling

From: Dmitry Osipenko
Date: Thu Dec 17 2020 - 13:10:11 EST


Enable CPU voltage scaling and thermal throttling on Tegra20 Ventana board.

Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
---
arch/arm/boot/dts/tegra20-ventana.dts | 40 ++++++++++++++++++++++++++-
1 file changed, 39 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index 14ace2ef749c..c2d9f38960bc 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -2,8 +2,10 @@
/dts-v1/;

#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
#include "tegra20.dtsi"
#include "tegra20-cpu-opp.dtsi"
+#include "tegra20-cpu-opp-microvolt.dtsi"

/ {
model = "NVIDIA Tegra20 Ventana evaluation board";
@@ -527,9 +529,10 @@ ldo_rtc {
};
};

- temperature-sensor@4c {
+ nct1008: temperature-sensor@4c {
compatible = "onnn,nct1008";
reg = <0x4c>;
+ #thermal-sensor-cells = <1>;
};
};

@@ -615,10 +618,13 @@ clk32k_in: clock@0 {

cpus {
cpu0: cpu@0 {
+ cpu-supply = <&vdd_cpu>;
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
};

cpu@1 {
+ cpu-supply = <&vdd_cpu>;
operating-points-v2 = <&cpu0_opp_table>;
};
};
@@ -717,4 +723,36 @@ sound {
<&tegra_car TEGRA20_CLK_CDEV1>;
clock-names = "pll_a", "pll_a_out0", "mclk";
};
+
+ thermal-zones {
+ cpu-thermal {
+ polling-delay-passive = <1000>; /* milliseconds */
+ polling-delay = <5000>; /* milliseconds */
+
+ thermal-sensors = <&nct1008 1>;
+
+ trips {
+ trip0: cpu-alert0 {
+ /* start throttling at 50C */
+ temperature = <50000>;
+ hysteresis = <200>;
+ type = "passive";
+ };
+
+ trip1: cpu-crit {
+ /* shut down at 60C */
+ temperature = <60000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&trip0>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
};
--
2.29.2