[PATCH v3 1/4] Add support for Realtek RTL838x/RTL839x switch SoCs
From: Bert Vermeulen
Date: Wed Dec 30 2020 - 16:24:15 EST
The RTL838x/839x family of SoCs are Realtek switches with an embedded
MIPS core.
* RTL838x - 500MHz 4kce single core - 1Gbit ports and L2 features
* RTL839x - 700MHz 34Kc single core - 1Gbit ports and L2 features
These switches, depending on the exact part number, will have anywhere
between 8 and 50 ports. The MIPS core is wired to a switch cpu port which
has a tagging feature allowing us to make use of the DSA subsystem.
The SoCs are somewhat basic in certain areas, getting better with more
advanced features on newer series.
The switch functionality is MMIO-mapped via a large MFD region.
The SoCs have the following peripherals
* ethernet
* switch
* uart - ns16550a
* spi-flash interface
* gpio
* wdt
* led
The code was derived from various vendor SDKs based on Linux v2.6
kernels.
This patchset allows us to boot RTL838x/RTL839x units with basic support.
Most of the other drivers are already written and functional, and work to
get them upstream is already in progress.
Signed-off-by: Birger Koblitz <mail@xxxxxxxxxxxxxxxxx>
Signed-off-by: Bert Vermeulen <bert@xxxxxxxx>
Signed-off-by: John Crispin <john@xxxxxxxxxxx>
Signed-off-by: Sander Vanheule <sander@xxxxxxxxxxxxx>
---
.../devicetree/bindings/mips/realtek-rtl.yaml | 24 ++++++
arch/mips/boot/dts/Makefile | 1 +
arch/mips/boot/dts/realtek/rtl838x.dtsi | 21 +++++
arch/mips/boot/dts/realtek/rtl839x.dtsi | 21 +++++
arch/mips/boot/dts/realtek/rtl83xx.dtsi | 83 +++++++++++++++++++
5 files changed, 150 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mips/realtek-rtl.yaml
create mode 100644 arch/mips/boot/dts/realtek/rtl838x.dtsi
create mode 100644 arch/mips/boot/dts/realtek/rtl839x.dtsi
create mode 100644 arch/mips/boot/dts/realtek/rtl83xx.dtsi
diff --git a/Documentation/devicetree/bindings/mips/realtek-rtl.yaml b/Documentation/devicetree/bindings/mips/realtek-rtl.yaml
new file mode 100644
index 000000000000..aadff8ce0f49
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/realtek-rtl.yaml
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/realtek-rtl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek RTL83xx/93xx SoC series device tree bindings
+
+maintainers:
+ - Bert Vermeulen <bert@xxxxxxxx>
+ - Sander Vanheule <sander@xxxxxxxxxxxxx>
+
+properties:
+ $nodename:
+ const: "/"
+ compatible:
+ oneOf:
+ # RTL8382-based boards
+ - items:
+ - enum:
+ - cisco,sg220-26
+ - const: realtek,rtl8382-soc
+
+additionalProperties: true
diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
index 0259238d7a2e..60bd7d2a9ad8 100644
--- a/arch/mips/boot/dts/Makefile
+++ b/arch/mips/boot/dts/Makefile
@@ -14,6 +14,7 @@ subdir-$(CONFIG_FIT_IMAGE_FDT_NI169445) += ni
subdir-$(CONFIG_MACH_PIC32) += pic32
subdir-$(CONFIG_ATH79) += qca
subdir-$(CONFIG_RALINK) += ralink
+subdir-$(CONFIG_MACH_REALTEK_RTL) += realtek
subdir-$(CONFIG_FIT_IMAGE_FDT_XILFPGA) += xilfpga
obj-$(CONFIG_BUILTIN_DTB) := $(addsuffix /, $(subdir-y))
diff --git a/arch/mips/boot/dts/realtek/rtl838x.dtsi b/arch/mips/boot/dts/realtek/rtl838x.dtsi
new file mode 100644
index 000000000000..6cc4ff5c0d19
--- /dev/null
+++ b/arch/mips/boot/dts/realtek/rtl838x.dtsi
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
+
+/ {
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "mips,mips4KEc";
+ reg = <0>;
+ clocks = <&baseclk 0>;
+ clock-names = "cpu";
+ };
+ };
+
+ baseclk: baseclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <500000000>;
+ };
+};
diff --git a/arch/mips/boot/dts/realtek/rtl839x.dtsi b/arch/mips/boot/dts/realtek/rtl839x.dtsi
new file mode 100644
index 000000000000..2b5bad8fcf2f
--- /dev/null
+++ b/arch/mips/boot/dts/realtek/rtl839x.dtsi
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
+
+/ {
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "mips,mips34Kc";
+ reg = <0>;
+ clocks = <&baseclk 0>;
+ clock-names = "cpu";
+ };
+ };
+
+ baseclk: baseclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <500000000>;
+ };
+};
diff --git a/arch/mips/boot/dts/realtek/rtl83xx.dtsi b/arch/mips/boot/dts/realtek/rtl83xx.dtsi
new file mode 100644
index 000000000000..17fa90002e00
--- /dev/null
+++ b/arch/mips/boot/dts/realtek/rtl83xx.dtsi
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ cpuintc: cpuintc {
+ compatible = "mti,cpu-interrupt-controller";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xb8000000 0x10000>;
+
+ spi: spi@1200 {
+ compatible = "realtek,rtl-spi";
+ reg = <0x1200 0x100>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ uart0: uart@2000 {
+ compatible = "ns16550a";
+ reg = <0x2000 0x100>;
+
+ clock-frequency = <200000000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <31>;
+
+ reg-io-width = <1>;
+ reg-shift = <2>;
+ fifo-size = <1>;
+ no-loopback-test;
+
+ status = "disabled";
+ };
+
+ uart1: uart@2100 {
+ compatible = "ns16550a";
+ reg = <0x2100 0x100>;
+
+ clock-frequency = <200000000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <30>;
+
+ reg-io-width = <1>;
+ reg-shift = <2>;
+ fifo-size = <1>;
+ no-loopback-test;
+
+ status = "disabled";
+ };
+
+ intc: interrupt-controller@3000 {
+ compatible = "realtek,rtl-intc";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ reg = <0x3000 0x20>;
+ };
+ };
+
+ switch_bus: switch-bus@bb000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xbb000000 0x10000>;
+ };
+};
--
2.25.1